Become a Site Supporter and Never see Ads again!

Author Topic: who can fix my core sound battery box with channel dropou  (Read 3332 times)

0 Members and 1 Guest are viewing this topic.

Online beatkilla

  • Trade Count: (70)
  • Needs to get out more...
  • *****
  • Posts: 2105
  • Gender: Male
who can fix my core sound battery box with channel dropou
« on: September 07, 2015, 07:07:38 PM »
I seem to recall an old thread with someone who said they had repaired several of these,i cant find that thead,they seemed to know about some being reverse polarity etc.Hit me up if thats you please.

Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Re: who can fix my core sound battery box with channel dropou
« Reply #1 on: September 07, 2015, 07:23:59 PM »
I have fixed a couple, these are notorious for solder points getting stressed from the resistors being packed in there to tight, not sure if that is your issue? The breaks can be hard to spot usually on the underside of the larger resistor

Online beatkilla

  • Trade Count: (70)
  • Needs to get out more...
  • *****
  • Posts: 2105
  • Gender: Male
Re: who can fix my core sound battery box with channel dropou
« Reply #2 on: September 08, 2015, 06:37:55 AM »
Pm sent

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: who can fix my core sound battery box with channel dropou
« Reply #3 on: September 08, 2015, 02:38:33 PM »
I seem to recall an old thread with someone who said they had repaired several of these,i cant find that thead,they seemed to know about some being reverse polarity etc.Hit me up if thats you please.

I'm sure you know this, but if your mics have a 1/8 plug you can skip the battery box and go mic in into the M10. Guysonic says the M10 and D50 power his mics perfectly, so I wouldn't be surprised if the D100 did as well. I've never used a battery box with mine. Have made great sounding recordings with both an M10 & D50.
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Online beatkilla

  • Trade Count: (70)
  • Needs to get out more...
  • *****
  • Posts: 2105
  • Gender: Male
Re: who can fix my core sound battery box with channel dropou
« Reply #4 on: September 08, 2015, 02:43:09 PM »
Im using At 853,and Countryman b3 with this box but yes i do run the Sonic Studios mics direct to the m10 and d100

Offline Len Moskowitz (Core Sound)

  • Site Supporter
  • Trade Count: (3)
  • Taperssection Member
  • *
  • Posts: 381
    • Core Sound
Re: who can fix my core sound battery box with channel dropou
« Reply #5 on: September 21, 2015, 10:53:23 PM »
Send it in for a free checkup.

If it has a switch, spray it with contact cleaner and work the switch back and forth.

If anyone can repair it, it's us.
Len Moskowitz
Core Sound
www.core-sound.com

Online beatkilla

  • Trade Count: (70)
  • Needs to get out more...
  • *****
  • Posts: 2105
  • Gender: Male
Re: who can fix my core sound battery box with channel dropou
« Reply #6 on: September 22, 2015, 06:51:16 AM »
I actually emailed you before posting this thread and never received a response.

Offline Len Moskowitz (Core Sound)

  • Site Supporter
  • Trade Count: (3)
  • Taperssection Member
  • *
  • Posts: 381
    • Core Sound
Re: who can fix my core sound battery box with channel dropou
« Reply #7 on: September 25, 2015, 05:22:39 PM »
If we received it, we would have responded.

Please use the email address: moskowit@core-sound.com .
Len Moskowitz
Core Sound
www.core-sound.com

 

RSS | Mobile
Page created in 0.045 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF