Hi all,
Does someone know how to fix this problem, so I can load it into Audacity or Wavelab??
Thanks in advance
never had this before, transfered my WAV file from my recorder with USB cable to my hard drive (same way as i do always), tried to play it back (use JetAudio) but the file won't play.
Tried to open it in Audacity, nothing shows up, then to WaveLab same problem.
Took out the SD card and tried to transfer it with an adapter, all of the above i tried with the same results.
Can play it back with VLC mediaplayer though.
Didn't change my settings before or during recording, settings are 24bit 48k ... BUT the log file says it's 24bit 44.1k
-------------------------------------------------------------------------------
File name: /Users/alexford/Desktop/DR0000_0082.wav
Handled by: wav format module
Length: 0:00.000
WAVE format: 0x0001 (Microsoft PCM)
Channels: 2
Bits/sample: 24
Samples/sec: 44100
Average bytes/sec: 264600
Rate (calculated): 264600
Block align: 6
Header size: 688 bytes
Data size: 0 bytes
Chunk size: 680 bytes
Total size (chunk size +
: 688 bytes
Actual file size: 1354773424
File is compressed: no
Compression ratio: 1969147.4186
CD-quality properties:
CD quality: no
Cut on sector boundary: n/a
Sector misalignment: n/a
Long enough to be burned: n/a
WAVE properties:
Non-canonical header: yes
Extra RIFF chunks: no
Possible problems:
File contains ID3v2 tag: no
Data chunk block-aligned: yes
Inconsistent header: no
File probably truncated: no
Junk appended to file: yes (1354772736 bytes)
Odd data size has pad byte: n/a