Become a Site Supporter and Never see Ads again!

Author Topic: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!  (Read 26158 times)

0 Members and 1 Guest are viewing this topic.

Offline firmdragon

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1280
  • Gender: Male
    • taping blog
hey guys,

i've decided my sound pro's battery box is too bulky and that i can do better in terms of space ( i also want to practice my soldering).  anyone got diagram for a batterybox that will power my dpas?

tia
« Last Edit: April 14, 2007, 12:22:24 AM by firmdragon »

Offline ghellquist

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 477
  • Gender: Male
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #1 on: March 11, 2007, 05:19:48 PM »
If you find nothing else, the DAD6001 (converter for 48V phantom) circuit is on the DPA website. You could use this for inspiration. Beats me though what a battery box would contain.



Gunnar

Offline firmdragon

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1280
  • Gender: Male
    • taping blog
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #2 on: March 12, 2007, 03:48:41 PM »
i was looking around the net for 9v battery boxes.
there's one here:
http://forums.minidisc.org/index.php?showtopic=11254

i posted the schematics  below.  what do you guys think? will it be able to power the dpas sufficiently?






fc = 1 / (2 * Pi * R * C)
C = 1 / (2 * Pi * R * fc)

fc = cutoff / rolloff frequency in Hz
Pi = 3.1415927...
R = Input resistance in Ohm
C = capacitor value in F (Farad), 1 uF = 0.000001 F

Offline dointhatrag

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 108
  • Gender: Male
    • my band
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #3 on: March 12, 2007, 04:30:42 PM »
I spent the money on a coresound battery box (w/ high pass switch) for my 4061's I think for about 50 bucks.

It is very solid and noiseless. its about the size of 3 cricket lighters stacked up.

http://www.core-sound.com/bk/IMG11A.JPG

Schoeps + Neumann + DPA - Sonosax PR - Apogee Mini Me - 24/96

Offline headroom

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 204
    • My Work with Photos and for Documentary Cinema ( Soundjob)
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #4 on: March 16, 2007, 05:56:00 AM »
Hi here this is official DPA 9 Volt schematic

Offline firmdragon

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1280
  • Gender: Male
    • taping blog
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #5 on: March 16, 2007, 02:03:24 PM »
Hi here this is official DPA 9 Volt schematic

oh bless you!  i'll try this out next week.

EDIT: so i made it and it seems to work. still haven't had a chance to use it in the field yet.  i'll update when i eventually do.
« Last Edit: March 21, 2007, 04:00:51 AM by firmdragon »

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #6 on: March 27, 2007, 08:30:24 PM »
If you find nothing else, the DAD6001 (converter for 48V phantom) circuit is on the DPA website. You could use this for inspiration. Beats me though what a battery box would contain.



Gunnar

Gunnar:

Is this all that is needed to power electrets with 48v phantom power?
Essentially droping 48v DC down to 9v DC?

I've been looking for a circuit like this for a while.

Chuck
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline ghellquist

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 477
  • Gender: Male
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #7 on: March 28, 2007, 04:54:31 PM »
I believe it should work with most simple mics. The zener will protect agains over-voltage and the fet in the mic will draw a certain amount of current dropping the the voltage even more. Just be very careful to install the zener the right way and do measure the open circuit voltage before connecting you mic. You might want to experiment a little with the exact resistor values depending on your mic.

Gunnar

Offline firmdragon

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1280
  • Gender: Male
    • taping blog
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #8 on: April 13, 2007, 08:38:21 PM »
so it took me a while to sucessfully test it out.  but here's some a pic of what it looks like and how it compares to a soundpro SP-SPSB-1.

edit:
I used a piece of veraboard and used a female mini-jack from an old soundcard.  the resistors and cap are all pretty common.  all held in togethor with hot glue.  in hindsight,  i should have used an old headphone male mini-jack instead of regular wire and that new gold jack.  the fact that the gold jack isn't a right angle plug also kinda sucks. also a some sort of housing for the battery probably wouldn't be a bad idea either.  one time between sets, i couldn't figure out why i wasn't getting levels, turned out the battery had become disconnected from the bb.

 questions, comments, suggestions? all welcomed. 
« Last Edit: April 13, 2007, 08:54:14 PM by firmdragon »

Offline firmdragon

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1280
  • Gender: Male
    • taping blog
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #9 on: April 13, 2007, 08:44:35 PM »
sample wav:  in front of an outdoor festival-sized PA.  seems to handle the bass/kick fine. so full setup was dpa 4061>diybb (i guess)>iriver ihp-140


Offline lordbelial

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 533
  • Gender: Male
  • Barcelona got tapers!
I build myself this official DPA bbox and taped Bruce Springsteen this weekend. I was under the stack, 5 or 6 meters high and i was positioned 10 meter in the rear part.
I found out that the overall volume was considerably low (-16db peak), I was wondering if the 100 K resistor to ground could be acting as attenuator of the signal @ output.

Gear used was: DPA4061 > Home made battery box (using the official 9V bbox for DPA) > Iriver IHP-104 (4GB CF Mod)

Any comment from the board technicians?
Actual Gear:

stealth  - AT943 (c,o,sc,h) > ST-9100 > Edirol R09HR/I-River IHP-116(CFMod)
Ultrastealth  - DPA 4061 > ST-9100 > Edirol R09HR/I-River IHP-116(CFMod)
Open - BSC1-K1/K2/K3/K4 > Segue Dogstars > Marantz PMD671 busman t-mod

Playback: PC > M-Audio Fast Track Pro > KRK RP6 actives

My shows on the archive: http://www.archive.org/bookmarks/tapemaniac
Member of  Busman Audio team

Offline lordbelial

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 533
  • Gender: Male
  • Barcelona got tapers!
I found out that the overall volume was considerably low (-16db peak), I was wondering if the 100 K resistor to ground could be acting as attenuator of the signal @ output.

No, the extra load of that resistor is so small that it makes little difference.  You could try a larger value for the 10K resistor if you need more gain.  At some point you will degrade performance, but it's hard to say where without knowing more about the mic.  You won't break anything though, so it's worth a try.

OK. I think is not worth trying to modify the 10K resistor. Anyway, it fits my stack-taping needs.

Thanks for the suggestion anyway!
Actual Gear:

stealth  - AT943 (c,o,sc,h) > ST-9100 > Edirol R09HR/I-River IHP-116(CFMod)
Ultrastealth  - DPA 4061 > ST-9100 > Edirol R09HR/I-River IHP-116(CFMod)
Open - BSC1-K1/K2/K3/K4 > Segue Dogstars > Marantz PMD671 busman t-mod

Playback: PC > M-Audio Fast Track Pro > KRK RP6 actives

My shows on the archive: http://www.archive.org/bookmarks/tapemaniac
Member of  Busman Audio team

Offline dabbler

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 359
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #12 on: February 17, 2015, 12:33:20 AM »
Thanks for that schematic, I used it built my own BB for the low-power 4063.
I decided to use one of the DPA mic boxes my 4063s arrived in since it's a great shape size for me with plenty of space to store a 12" mini-mini cable when not in use.
All the parts in the DPA schematic + lots of electronics-grade silicone sealant for stability.

I probably won't even need it since the 4063 seems alright out of the M10 PiP, but I could pack this for days when I don't mind travelling a little heavier.
Edit: I forgot to note I'm using Blu-Tack to hold the 9V in place, so it's secure yet removable.
« Last Edit: February 17, 2015, 12:55:04 AM by dabbler »

Offline dabbler

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 359
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #13 on: October 29, 2015, 03:19:54 AM »
I'm also using the official DPA circuit provided by headroom for DPA 4061 mics.
However, I'm wondering if it's really enough since some of my stack/stage lip recordings do exhibit a tiny amount of distortion (which could also be from the PA system itself, I couldn't tell wearing foam earplugs).
The maximum current draw of the DPA 406x series is 1.5 mA (3.5mA with DAD6001) according to Jarrod from DPA.

A 9V / 10K resistor would only give 0.9 mA; so maybe 4.7K is a better match (giving 1.91 mA)?
I've only made one comp several months ago with a 4.7K vs 10K side-by-side on otherwise identical rigs (DPA 4061 + M10) and the 4.7K recording was 1.5-2dB louder while keeping the 100K resistor.  The show wasn't very loud, so I didn't notice a quality difference at the loudest sections.

Btw, am I correct the 100K resistor is only for output attenuation and would not affect powering of the mic?

Offline Len Moskowitz (Core Sound)

  • Site Supporter
  • Trade Count: (3)
  • Taperssection Member
  • *
  • Posts: 381
    • Core Sound
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #14 on: October 29, 2015, 05:03:36 AM »
If you're hearing distortion, it's not from the DPAs.

Even 10k Ohm is marginal in protecting the capsule. With a fresh, so-called "9 Volt" battery (which can really measure as much as 9.6 Volts), you risk damaging the capsule.

With 4.7k you'll almost certainly eventually damage or destroy it.
« Last Edit: October 29, 2015, 05:07:06 AM by Len Moskowitz (Core Sound) »
Len Moskowitz
Core Sound
www.core-sound.com

Offline dabbler

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 359
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #15 on: October 29, 2015, 05:39:31 AM »
Actually, I've been hoping to switch to the EBL 9V Li-ions which are only 8.4V.
I would get a nice weight reduction, too.

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #16 on: March 14, 2019, 04:10:17 AM »
Hi here this is official DPA 9 Volt schematic
sorry to dig up old thread. does it matter which way cap goes in this schematic? firmdragon's sketch has the + facing the mics, DPA schematic doesnt specify. Also in headroom's post here:

https://taperssection.com/index.php?topic=94046.msg1397122#msg1397122

he suggests using a 470 uF 10V cap, which seems way different. what is the effect of changing the capacitance by so much?
« Last Edit: March 14, 2019, 04:32:41 AM by jerryfreak »
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #17 on: March 15, 2019, 04:50:41 AM »
anybody know where to get female microdot panel connectors (or somethign small i could pot)

like this, but in the US

http://www.coax-connectors.com/products/connectors/10-32/54-385-b3-10-32-(microdot)-front-mount-bulkhead-jack-solder-post.aspx
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline jefflester

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1557
  • Gender: Male
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #18 on: March 15, 2019, 05:41:24 AM »
anybody know where to get female microdot panel connectors (or somethign small i could pot)

like this, but in the US

http://www.coax-connectors.com/products/connectors/10-32/54-385-b3-10-32-(microdot)-front-mount-bulkhead-jack-solder-post.aspx
Found this just by Googling, $112 apiece.
https://www.te.com/usa-en/product-1467936-1.html

DPA4061 HEB -> R-09 / AT943 -> CA-UGLY -> R-09
AKG CK63 -> nBob actives -> Baby NBox -> R-09/DR2d
AKG CK63 -> AKG C460B -> Zoom F8/DR-680MKII
Line Audio CM4/Superlux S502/Samson C02/iSK Little Gem/Sennheiser E609/Shure SM57 -> Zoom F8/DR-680MKII (multitracked band recordings)

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #19 on: March 15, 2019, 06:46:48 AM »
i should have added affordable! i see a few stateside for $30-$50, and ones from china for $2. theres gotta be a middle ground
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #20 on: April 16, 2019, 07:19:24 PM »
If you're hearing distortion, it's not from the DPAs.

Even 10k Ohm is marginal in protecting the capsule. With a fresh, so-called "9 Volt" battery (which can really measure as much as 9.6 Volts), you risk damaging the capsule.

With 4.7k you'll almost certainly eventually damage or destroy it.

is it always wise to limit current to less than the capsule maximum? in this case is the capsule max current the max it will draw, or the max it should be allowed to draw?
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline spyder9

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 13192
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #21 on: April 21, 2019, 11:47:16 PM »
Here's the battery box I use.  Works flawlessly with my DPA 4061's.  This BB is super tiny.

https://www.soundprofessionals.com/cgi-bin/gold/item/SP-SPSB-10

ilduclo

  • Guest
  • Trade Count: (0)
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #22 on: April 22, 2019, 07:46:56 AM »
so it took me a while to sucessfully test it out.  but here's some a pic of what it looks like and how it compares to a soundpro SP-SPSB-1.

edit:
I used a piece of veraboard and used a female mini-jack from an old soundcard.  the resistors and cap are all pretty common.  all held in togethor with hot glue.  in hindsight,  i should have used an old headphone male mini-jack instead of regular wire and that new gold jack.  the fact that the gold jack isn't a right angle plug also kinda sucks. also a some sort of housing for the battery probably wouldn't be a bad idea either.  one time between sets, i couldn't figure out why i wasn't getting levels, turned out the battery had become disconnected from the bb.

 questions, comments, suggestions? all welcomed.

I think the sp 11 used to be quite similar in size...had the roll off switches, but was tiny and had a nice “ sled” that the 9v fit into.  They’re not making it any longer...

Offline spyder9

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 13192
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #23 on: April 22, 2019, 04:05:28 PM »

I think the sp 11 used to be quite similar in size...had the roll off switches, but was tiny and had a nice “ sled” that the 9v fit into. They’re not making it any longer...

Not true.  Sound Professionals still makes the SPSB-11.  However, its slightly bigger than the SPSB-10.   SP-10 is the way to go, imo.  Ultra tiny setup.

https://www.soundprofessionals.com/cgi-bin/gold/item/SP-SPSB-11

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #24 on: April 23, 2019, 02:47:42 AM »
Here's the battery box I use.  Works flawlessly with my DPA 4061's.  This BB is super tiny.

https://www.soundprofessionals.com/cgi-bin/gold/item/SP-SPSB-10
According to Len 12 V will kill your 406x in short order
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

ilduclo

  • Guest
  • Trade Count: (0)
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #25 on: April 23, 2019, 08:49:51 AM »

I think the sp 11 used to be quite similar in size...had the roll off switches, but was tiny and had a nice “ sled” that the 9v fit into. They’re not making it any longer...

Not true.  Sound Professionals still makes the SPSB-11.  However, its slightly bigger than the SPSB-10.   SP-10 is the way to go, imo.  Ultra tiny setup.

https://www.soundprofessionals.com/cgi-bin/gold/item/SP-SPSB-11

Well, the 11 USED to be smaller. Also, it was a 9v.

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: DIY batterybox for dpa 4061 (iso: schematics?) edit: Now with pictures!
« Reply #26 on: April 25, 2019, 02:54:08 PM »
theres a somewhat spendy mps6040 batt box on reverb right now
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline rhinowing

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4238
  • Gender: Male
    • SPLRA - Smashing Pumpkins Live Recording Association
Re: DIY batterybox for dpa 4061 (iso: schematics?)
« Reply #27 on: May 02, 2019, 02:22:17 PM »

I think the sp 11 used to be quite similar in size...had the roll off switches, but was tiny and had a nice “ sled” that the 9v fit into. They’re not making it any longer...

Not true.  Sound Professionals still makes the SPSB-11.  However, its slightly bigger than the SPSB-10.   SP-10 is the way to go, imo.  Ultra tiny setup.

https://www.soundprofessionals.com/cgi-bin/gold/item/SP-SPSB-11

They used to sell this box as the SP-SPSB-10 back around 2008, my original rig had one. When I replaced it in 2012 I noticed that they now sell that box as the SPSB-11 and the new SPSB-10 is the same box but without switches
Please contact me if you've ever taped the Smashing Pumpkins or a related group!

 

RSS | Mobile
Page created in 0.133 seconds with 53 queries.
© 2002-2024 Taperssection.com
Powered by SMF