Become a Site Supporter and Never see Ads again!

Author Topic: providing external power to sony mz-rh1?  (Read 6385 times)

0 Members and 1 Guest are viewing this topic.

Offline beathydrolysis

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 61
  • Gender: Male
providing external power to sony mz-rh1?
« on: July 24, 2006, 10:47:58 PM »
As many of you know sony ditched the external dry battery pack from their past models (m100, etc.) instead opting for charging via USB for the mz-rh1.  Does anyone know of a safe, reliable, convenient remote power source for the mz-rh1?  I don't know the units power consumption (I thinks its like 5 V but I haven't ordered one yet am unwilling to unless I can power it remotely for those long festival days.)  I've seen external li-on batteries with like 3400 mAh which would give me like 30+ hours of linear PCM record time but I don't know if this will work for the mz-rh1 (they advertise them for ipods and psp s).  Any help would be greatly appreciated.  Thanks. 
Take care of the tapers and the tapers will take care of you.

Offline dunebug81

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2045
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #1 on: July 25, 2006, 01:16:23 AM »
Im going to make one of those AA Altoids things that has a USB out and see how that works out for me.  I just got my RH1 today and taped a show tonight.  Taped an hour and 40 min in HISP w/ the LED on and it still had full juice.  According to the manual it will record for about 6hours on PCM and 7 on HISP.  which I think should be enough for MOST shows.  I might order a few extra of the Altoid USB things and send them to people with RH1s since not having the AA battery thing sucks...but the nice lithium battery is uses is much better then the Ni-MH. 

You can always buy another internal battery to keep for backup.

Heres the AA thing I mentioned.

http://taperssection.com/index.php?topic=67640.0
« Last Edit: July 25, 2006, 01:18:39 AM by dunebug81 »
Greg
www.enemyzero.com/greg/
aim: dunebug81

Offline beathydrolysis

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 61
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #2 on: July 25, 2006, 10:09:19 AM »
Hey, that minty boost looks great but I'm not sure a 2 AA model provides the proper power requirements.  Like I mentioned before I think the mz-rh1 likes 5 V (though I'm not sure that's the min.) and 2 AA would only provide 2.5 V.  I also thought that USB was a standard 5 V (so in theory the minty boost wouldn't be enough for the microtrack either and obviously that's not the case so I may just be full of it).  Has anyone tried the minty boost or other related product with an rh1?  Thanks
Take care of the tapers and the tapers will take care of you.

Offline dunebug81

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2045
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #3 on: July 25, 2006, 12:03:55 PM »
Hey, that minty boost looks great but I'm not sure a 2 AA model provides the proper power requirements.  Like I mentioned before I think the mz-rh1 likes 5 V (though I'm not sure that's the min.) and 2 AA would only provide 2.5 V.  I also thought that USB was a standard 5 V (so in theory the minty boost wouldn't be enough for the microtrack either and obviously that's not the case so I may just be full of it).  Has anyone tried the minty boost or other related product with an rh1?  Thanks

USB provides at the most 5v.  The internal lithium battery is 3.7 volts.  On the item page is says its good for charging an ipod which also uses a lithium battery @ 3.7v.  if nothing else you can charge the internal for 30-40 min between sets.  If I read the manual correctly an 80% charge is done in one hour.

Ill have to do some more research. 

You can always just buy another battery.

http://cgi.ebay.com/New-Sony-Hi-MD-Lithium-Ion-Battery-LIP-4WM-MZ-NH3D-a_W0QQitemZ140010615624QQihZ004QQcategoryZ14951QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
« Last Edit: July 25, 2006, 12:06:36 PM by dunebug81 »
Greg
www.enemyzero.com/greg/
aim: dunebug81

Offline beathydrolysis

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 61
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #4 on: July 25, 2006, 02:19:52 PM »
Thanks for the heads up on the extra internal li on batts.  I'm really more interested in something like this if it will work

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200010885072&fromMakeTrack=true

What do you guys think?
Take care of the tapers and the tapers will take care of you.

Offline flintstone

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 767
Re: providing external power to sony mz-rh1?
« Reply #5 on: August 04, 2006, 03:08:31 PM »

I think carrying a spare Sony battery is the
easiest solution.  You're going to have to
change the Hi-MD disc anyway, so why not
swap in a new Sony battery at the same time?

The battery is LIP-4WM, available on eBay for
$15 to $18 shipped from somewhere in the
Far East.

Flintstone

Offline beathydrolysis

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 61
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #6 on: August 04, 2006, 03:39:22 PM »
I think you might be right
Take care of the tapers and the tapers will take care of you.

Offline dunebug81

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2045
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #7 on: August 04, 2006, 04:07:02 PM »
I dunno about buying one from a seller in China...that has scam written all over it.
Greg
www.enemyzero.com/greg/
aim: dunebug81

Offline flintstone

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 767
Re: providing external power to sony mz-rh1?
« Reply #8 on: August 05, 2006, 01:47:03 AM »
No worries.  I buy stuff like batteries from Chinese sources on eBay regularly, and have never had a problem.

Flintstone

Offline beathydrolysis

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 61
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #9 on: August 05, 2006, 10:40:42 AM »
Yeah, I've gotten stuff like that from China as well, and often times it arrives faster than stuff shipped domestically.  I don't know how they do it but it's quite impressive.
Take care of the tapers and the tapers will take care of you.

Offline dunebug81

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2045
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #10 on: August 05, 2006, 10:45:38 AM »
Huh, well that is some good news.  Ill have to pick up an extra battery or two next week...ive spent all my money this morning on Tool tickets :)
Greg
www.enemyzero.com/greg/
aim: dunebug81

Offline beathydrolysis

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 61
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #11 on: August 05, 2006, 01:26:27 PM »
Sweet.  Where are you going to see tool.  I got tickets for a mid-september show at the target center in Minneapolis.  Thinking about doing a stealth job for some of my buddies...
Take care of the tapers and the tapers will take care of you.

Offline dunebug81

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2045
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #12 on: August 05, 2006, 02:52:00 PM »
Sweet.  Where are you going to see tool.  I got tickets for a mid-september show at the target center in Minneapolis.  Thinking about doing a stealth job for some of my buddies...

Since I've given up hope on them coming to the southeast Im going to DC (9/30) - Uniondale, NY (10/07).  6 shows in 8 days should be quite the roadtrip.
Greg
www.enemyzero.com/greg/
aim: dunebug81

Offline beathydrolysis

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 61
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #13 on: August 06, 2006, 06:48:06 PM »
Sweet.  Where are you going to see tool.  I got tickets for a mid-september show at the target center in Minneapolis.  Thinking about doing a stealth job for some of my buddies...

Since I've given up hope on them coming to the southeast Im going to DC (9/30) - Uniondale, NY (10/07).  6 shows in 8 days should be quite the roadtrip.

Do you think you'll tape at all?  I'd love to get my hands on some of those shows if you do.
Take care of the tapers and the tapers will take care of you.

Offline dunebug81

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2045
  • Gender: Male
Re: providing external power to sony mz-rh1?
« Reply #14 on: August 07, 2006, 12:11:18 AM »
Sweet.  Where are you going to see tool.  I got tickets for a mid-september show at the target center in Minneapolis.  Thinking about doing a stealth job for some of my buddies...

Since I've given up hope on them coming to the southeast Im going to DC (9/30) - Uniondale, NY (10/07).  6 shows in 8 days should be quite the roadtrip.

Do you think you'll tape at all?  I'd love to get my hands on some of those shows if you do.

Depending on who I go with Ill tape at least one or two...if I go it alone then Ill prolly do all of them.  Drop me a msg after the shows and Ill send em your way.
Greg
www.enemyzero.com/greg/
aim: dunebug81

 

RSS | Mobile
Page created in 0.179 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF