Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: lsd2525 on July 29, 2016, 12:32:24 PM

Title: Naztech 15000 - Output connector
Post by: lsd2525 on July 29, 2016, 12:32:24 PM
OK, so I want to make a custom cable for the output on the 15000. None of the adaptor tips meet my needs. That being said, I don't want to hack up the output cable that came with it. Does anyone know what size/style or whatever of the output connecter? Trying to find the right thing so I can make my on. Or, if anyone has a spare they would be willing to part with? Thanks, Dan
Title: Re: Naztech 15000 - Output connector
Post by: caymanreview on July 30, 2016, 03:15:40 AM
shoot Ted a pm. he makes all my cables. including 2 pb15000 cables to hirose, one for pb15000 and one for a tekkeon. And another just pb15000 to hirose.

they are perfect. every order ive made was in my mailbox before I knew it.


http://taperssection.com/index.php?topic=133186.msg2195992#new (http://taperssection.com/index.php?topic=133186.msg2195992#new)
Title: Re: Naztech 15000 - Output connector
Post by: drewloo on July 31, 2016, 06:48:26 AM
The plug dimensions are in the sticky at the top of the Remote Power page.

Naztech PB15000 Universal Power Bank Charger / 9,12,16,18,19,20,21v & 5v USB Port   / Size N, 5.50mm OD × 2.50mm ID
Title: Re: Naztech 15000 - Output connector
Post by: lsd2525 on August 04, 2016, 10:58:11 AM
Rockin'!! Thanks for the heads up!
Title: Re: Naztech 15000 - Output connector
Post by: rigpimp on September 14, 2016, 04:34:40 PM
Buy one of these and add whatever tips you need.

https://www.radioshack.com/products/radioshack-6ft-power-cord-for-adaptaplug?variant=7188488197

I just bought 2 and some tips.

I also bought the cable end below and soldered it to a hacked USB cable to get solid 5v off the same battery that throws multiple voltages.  Powering 2 devices at once from a single battery =  :cheers:

(http://i.ebayimg.com/images/g/WT4AAOSw-kdXxyz9/s-l1600.jpg) 

Bare wire on one side and adaptaplug socket on the other.  The best part about the adaptaplug series is that if you change gear at some point you just swap tips.
Title: Re: Naztech 15000 - Output connector
Post by: F.O.Bean on September 15, 2016, 06:10:54 PM
Nice RigPimp! I used to heatshrink my Adaptaplug tips onto that connector you posted above ;) If you switch gear like you said, just cut heatshrink off and apply new Adaptaplug end! But I always felt "safer" with the heatshrink over the Adaptaplug connection just for extra security :)