Become a Site Supporter and Never see Ads again!

Author Topic: time to buy a home dat deck  (Read 7363 times)

0 Members and 1 Guest are viewing this topic.

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22376
  • Gender: Male
    • Hurricanes Insider
Re:time to buy a home dat deck
« Reply #15 on: September 30, 2003, 02:47:11 PM »
you may not have problems eventually, but most have this problem...see below thread.

http://www.taperssection.com/yabbse/index.php?board=11;action=display;threadid=2908;start=msg24689#msg24689

Offline Kevin Straker

  • The Shogun of Easley
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2310
  • Gender: Male
Re:time to buy a home dat deck
« Reply #16 on: September 30, 2003, 03:00:03 PM »
just get a da20mkII... they're work horses!!!!! you should be able to get them from well under $300 on ebay.

can i play 90m tapes in the da20mkII?  i thought i remembered hearing that one of the tascams can't play the 90m tapes.  thanks for all the advice, i was looking at the r300 on ebay but after hearing about nick's issues i think i'll pass on it.

To play 90m's on my da30mkII you have to put a small piece of tape over the "tape length detection holes" on the left side of the tape. No problem after that. Just make sure that the piece of tape comes back out with the tape.
People on ludes should not drive...
J. Spicoli

mk4,mk21>kc5>cmc6>V3>SD722

Offline leegeddy

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1953
  • Gender: Male
Re:time to buy a home dat deck
« Reply #17 on: November 04, 2003, 12:47:37 PM »
what do you guys think about the R500s?

love it. i have one and it's a brute.  it's a 4motor transport and will play 90m tapes without a single prob.  i've even played a 120meter tape for cloning.  

to check head hours:

Menu > Jog Shuttle until "HOUR ## ##" shows.

"I'm a taper, he's a taper. Wouldn't you like to be a taper too?"
"Mics? What mics? This is my hat."

 

RSS | Mobile
Page created in 0.176 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF