Become a Site Supporter and Never see Ads again!

Author Topic: 1/4 on the SBM  (Read 2068 times)

0 Members and 1 Guest are viewing this topic.

Offline pnobles

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 600
  • Gender: Male
    • ME !
1/4 on the SBM
« on: April 25, 2004, 07:07:22 PM »
so i recorded a gig last night for the UD vocal group, the del tones and i was checking levels and such during their sound check and came into a problem with my SBM.  

The sound man offered a 1/4 patch from the board which i ran into the 1/4 jacks.  well i listened to soundcheck and all i heard was distortion from the SMB-1.  I then ran into the RCA's and it sounded fine.  this was my first time running into the 1/4 jacks ( so i never really use them )  but any ideas on the problem?  I check the mic in / line in switch and all that stuff.
thanks
Patrick Nobles
pnobles@udel.edu
http://udel.edu/~pnobles   <- check it out

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22376
  • Gender: Male
    • Hurricanes Insider
Re:1/4 on the SBM
« Reply #1 on: April 25, 2004, 07:24:10 PM »
Is it a mod sbm-1?  I believe Doug "disables" the 1/4 ins on the mods....

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:1/4 on the SBM
« Reply #2 on: April 25, 2004, 07:34:55 PM »
I believe the SBM-1's 1/4" inputs are mic-in, so the SBD signal probably overloaded the analog input stage.  Or, they're disabled...but in that case I would expect to hear, well...nothing.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline pnobles

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 600
  • Gender: Male
    • ME !
Re:1/4 on the SBM
« Reply #3 on: April 26, 2004, 12:36:37 AM »
no mod.   and it would make sense that they over loaded with mic in because i was going board in, which i bet had a hot signal...thanks all!
Patrick Nobles
pnobles@udel.edu
http://udel.edu/~pnobles   <- check it out

 

RSS | Mobile
Page created in 0.069 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF