Become a Site Supporter and Never see Ads again!

Author Topic: Anker Powercore+ 10500  (Read 1325 times)

0 Members and 1 Guest are viewing this topic.

Offline spyder9

  • Trade Count: (59)
  • Needs to get out more...
  • *****
  • Posts: 12054
  • Gender: Male
  • fahgeddaboudit
    • My Archived shows
Anker Powercore+ 10500
« on: September 18, 2015, 01:21:26 PM »
Anker Powercore+ 10500 

Just stumbled upon this today.  Outputs 5V/9V/12V

Tiny.

Info:

http://www.ianker.com/product/A1310011


Review:

https://www.youtube.com/watch?v=gc9p5raOBFg


Dirt cheap  $32.99 on Amazon

http://www.amazon.com/gp/product/B013HSQXZC/ref=s9_dcbhz_bw_d0_g107_i1_sh



Product Specification:

Capacity 10500 mAh / 36.18 Wh
Output 5V / 2.4A, 9V / 2A, 12V / 1.5A
Input 5V / 2A, 9V / 2A
Weight 8.3oz / 236g
Size 3.8 x 2.4 x 0.9in / 96 x 61 x 23mm



Thoughts?  I want to use it with a Shure FP24




« Last Edit: September 18, 2015, 01:35:43 PM by spyder9 »

Offline jcb

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 37
Re: Anker Powercore+ 10500
« Reply #1 on: September 18, 2015, 02:21:54 PM »
As far as I undertand the specs for this thing, there is only one USB power connector and no way for the user to choose the voltage. It seems to be the powercharge technology that through some kind of dialog between the charger and the device adjusts to a higher voltage (9 or 12 volt) when the battery is low and reduces it to near 5 volt when the charge is complete. When a non powercharge device is connected voltage seems to stay at 5 volt.
So if the Shure can live with 5 volt, it should work as it would with any other USB power source. If it requires more volts, it will probably not work (the Sound Devices MixPre-D would not).

Offline spyder9

  • Trade Count: (59)
  • Needs to get out more...
  • *****
  • Posts: 12054
  • Gender: Male
  • fahgeddaboudit
    • My Archived shows
Re: Anker Powercore+ 10500
« Reply #2 on: September 18, 2015, 10:44:42 PM »
As far as I undertand the specs for this thing, there is only one USB power connector and no way for the user to choose the voltage. It seems to be the powercharge technology that through some kind of dialog between the charger and the device adjusts to a higher voltage (9 or 12 volt) when the battery is low and reduces it to near 5 volt when the charge is complete. When a non powercharge device is connected voltage seems to stay at 5 volt.
So if the Shure can live with 5 volt, it should work as it would with any other USB power source. If it requires more volts, it will probably not work (the Sound Devices MixPre-D would not).

Perfect feedback.  Thanks.  If this had selectable DC voltage, then I would be golden.  Sadly, I'm gonna have to wait till next year's models.  I love the size.  Getting a 9V/12V battery that's half the size of a Tekkeon MP-3300, is what I'm looking for.......

Offline jcb

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 37
Re: Anker Powercore+ 10500
« Reply #3 on: September 19, 2015, 02:07:15 AM »
Tell us if you find it. I'd love one too !

 

RSS | Mobile
Page created in 0.086 seconds with 26 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company