Become a Site Supporter and Never see Ads again!

Author Topic: What rig to run ?  (Read 5561 times)

0 Members and 1 Guest are viewing this topic.

Offline wboswell

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3411
  • Gender: Male
  • Don't call what you're wearing an outfit
    • Trey Woodruff on guitar
What rig to run ?
« on: April 29, 2003, 12:54:40 PM »
I friend is playing at a local club next week and wants me to record the show.  Obviously, I will be able to run any type of setup I want, but I was wondering what others think would be the ideal setup.  I have several decks to run and have software to do a matrix.  For some reason, I want to put something (cards - don't have access to omni at the moment) on stage, hypers in the aud, and then run a board copy.  

He is a local singer songwriter.  Edwin McCain just produced his album and this is the CD release party.  He'll be with a full band doing music Edwin/Hootie genre.

Should I even mess with the cards on stage?  I prolly will opt to just run cards in the aud and mix the sbd in with soundforge.  That just sounds boring to me  :)

Opinions?

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:What rig to run ?
« Reply #1 on: April 29, 2003, 02:16:52 PM »
depending on the size of the club, you could run your hypers at the band from the board and the cards to the aud from onstage ala phish....this would give a nice reproduction of the crowd w/ the band being picked up on the board and hypersm set up from the board...i dunno, it would be fun to try tho... ;)

my 00.02

bean
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline mterry

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3055
  • Gender: Male
    • recordings
Re:What rig to run ?
« Reply #2 on: April 29, 2003, 02:22:13 PM »
yeah, I was thinking the same. with the cards on stage you would be picking up some of the monitors as well, with more drums in the mix...........give it a shot
"That's deplorable, unfathomable, improbable!"

"Then we played Davidson, and they wore us out. Davidson controlled us - other than Kentucky - as well as any team all year long"
- Bill Self on PTI (2/28/11)

DPA 2012 > Apogee Mini-Me > Tascam DR-100mkIII

Offline schoeps t00bes

  • Local Crew
  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1371
  • Gender: Male
Re:What rig to run ?
« Reply #3 on: April 29, 2003, 02:41:13 PM »
run the cards NOS onstage!!!
this will give a real ncie soundstage if the band isn't too bunched together.  if they are...just reduce the included angle a bit.
good luck,
dave
Fuck MSG!!!

Offline wboswell

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3411
  • Gender: Male
  • Don't call what you're wearing an outfit
    • Trey Woodruff on guitar
Re:What rig to run ?
« Reply #4 on: April 29, 2003, 02:45:22 PM »
So, you are saying point the cards toward the aud and run hypers from the soundboard?  Are you saying run a sbd copy as well and matrix the three?  Looking for more clarification.

I can't imagine the place being all that full for the show.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:What rig to run ?
« Reply #5 on: April 29, 2003, 02:49:05 PM »
if its a small place and its not gonna be that full, i would run the cards at the aud and matrix that....just my 00.02

bean
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline wboswell

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3411
  • Gender: Male
  • Don't call what you're wearing an outfit
    • Trey Woodruff on guitar
Re:What rig to run ?
« Reply #6 on: April 29, 2003, 03:02:03 PM »
if its a small place and its not gonna be that full, i would run the cards at the aud and matrix that....just my 00.02

bean

onstage cards pointed at aud + dsbd if I get you right...

If I do that, I can run them through the snake back to the board and be out of the way.

Thanks for the ideas

So far, I'll prolly still go for the mk4>kcy>cmc6>v3 25'/dfc and run a sbd>p1 copy and do a mix in the post.
 

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:What rig to run ?
« Reply #7 on: April 29, 2003, 05:01:05 PM »
soundz great bro....hope all goes well.....that is exactly what i meant....i would love to hear the results.... ;)

bean
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Jason B

  • Guest
  • Trade Count: (0)
Re:What rig to run ?
« Reply #8 on: April 29, 2003, 05:05:09 PM »
If you have the capability, Blumlein or cards on-stage, one onmi in the aud and the board patch.

-JB

Offline the magoo

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2452
  • Gender: Male
  • better off dead
Re:What rig to run ?
« Reply #9 on: April 30, 2003, 12:03:11 AM »
i dont think that bean knows what hes doin  hahahahahahlol :o
"if u see me comin' better step aside, alot of men didn't and alot of men died. one fist of iron, the other of steel, and if the right one don't get ya then the left one will"

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re:What rig to run ?
« Reply #10 on: April 30, 2003, 12:11:44 AM »
phuck you, you real life mini-me....oooooohhhhh that was a good one... ;)

bean
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

 

RSS | Mobile
Page created in 0.083 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF