so there you go. the key thing, when syncing the AD2K to the V3 clock is to NOT use the word clock output. the manual says that it needs to be AES or S/PDIF for the digital lock. the good thing is that the V3 has both S/PDIF and AES ouputs, so whichever one you aren't using to send to your record deck, you can use the other one to the AD2K to get it all sync'ed up.
Connected AES out from V3 to the digital input on the AD2K and bam! lock led on the 2k flashed for a few seconds then stayed solid and lit. Awesome. Got the second microtrack today at Guitar Center for 240. Not too bad! I might sell my MT1 and buy another 2. The other great thing is I have an easy way to run a backup for those "must not screw this one up" type nights.
I'm going to tape The Brew tomorrow night and see if I can do 4's>v3>MT1 + sbd>ad2k>mt2. And apparently I can use Sound Studio to do the mix down which I already have. This is such an awesome feature about my setup that I didn't even realize I had!
that is sweetness jesse
let us know, and hear, how it went
if I were you tho and you started to do this more often(which you should), then id get an r44 in a heartbeat. i saw rob clarke's at moedown and it is TINY compared to the r-4
just need cf cards
and i bet its battery compared to the r44 is alot better.
but, you are golden w/ what you ahve. very cool. ive never messed w/ word clocks, but that is supa cool IMO