Become a Site Supporter and Never see Ads again!

Author Topic: AT822>Microtracker Issue  (Read 1431 times)

0 Members and 1 Guest are viewing this topic.

Offline ziko

  • Trade Count: (28)
  • Taperssection Member
  • ***
  • Posts: 457
AT822>Microtracker Issue
« on: September 27, 2008, 11:50:21 AM »
Hoping someone here has the answer. I have a audio-technica822 stereo mic running into a microtracker.  This is my back/stealth deal I hope. I have recorded up close with it a few times and even 20 feet back and I am basically getting a half a effing wave. whats there like would be great if the other half was there. d'oh. I am going into the 1/8 mic input. any help greatly appreciated.

john
image posting tanked so here is the link
http://img259.imageshack.us/my.php?image=at822issueoi2.jpg




« Last Edit: September 27, 2008, 11:52:01 AM by ziko »

Offline taperwheeler

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 496
  • Gender: Male
Re: AT822>Microtracker Issue
« Reply #1 on: September 27, 2008, 03:15:59 PM »
Are you using the MT 1 or MT 2?  I've made a few recordings using other AT mics going into my MT 2 1/8 input and have noticed a similar wav effect, just not as severe, but one side definately a lot shorter (cutoff?)

I noticed it moreso on a recording done with no battery box. 
Mics: SP-CMC-8 AT933 Body 4.7K mod AT853 (c, sc) U853 (h) Microline Shotguns
Pres: CA 9100, SP-Preamp
Recorders: MT2 , Tascam DR-07, PCM-M10, PCM A10

Offline anechoic

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 89
  • Gender: Male
  • composer, writer, sound designer
Re: AT822>Microtracker Issue
« Reply #2 on: September 27, 2008, 03:19:28 PM »
check the polarity of the battery and if it is new
other than that check the cable for shorts or breaks
'In the new world the characteristic unit will be
small, highly mobile, independent and intelligent.'
                                - Robert Fripp

Offline ziko

  • Trade Count: (28)
  • Taperssection Member
  • ***
  • Posts: 457
Re: AT822>Microtracker Issue
« Reply #3 on: September 27, 2008, 08:55:43 PM »
Microtracker2

I will check the cable and battery. all are new but.....

 

RSS | Mobile
Page created in 0.127 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF