Become a Site Supporter and Never see Ads again!

Author Topic: equipment question battery  (Read 3843 times)

0 Members and 1 Guest are viewing this topic.

Offline Temm

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
equipment question battery
« on: June 09, 2010, 12:15:59 PM »
Hey..need a battery for my V3 and DA_P1 12/7.5 any ideas on where to find?  I would buy new or used...
thanks
Tem

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: equipment question battery
« Reply #1 on: June 09, 2010, 01:09:05 PM »
What is the voltage requirements?  V3s come in 12v or 6v.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline Temm

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Re: equipment question battery
« Reply #2 on: June 09, 2010, 02:31:42 PM »
12 volt

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: equipment question battery
« Reply #3 on: June 09, 2010, 03:36:26 PM »
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline Temm

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Re: equipment question battery
« Reply #4 on: June 10, 2010, 12:31:18 PM »
Thanks for the help on that. Not doing too much recording, since 2006, and need to power both the dat and the pre;so you are suggesting the MP3450i. that would cover the 7.5 volt to 12 volt range I need, it looks like.

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: equipment question battery
« Reply #5 on: June 10, 2010, 12:41:02 PM »
Thanks for the help on that. Not doing too much recording, since 2006, and need to power both the dat and the pre;so you are suggesting the MP3450i. that would cover the 7.5 volt to 12 volt range I need, it looks like.

yes, but you can't power both voltages at the same time with the tekkeon.  What you can do is switch the V3 from 12v to a 6v by changing the jumpers in the unit.  I did it myself and it is real easy.  The v3 set at 6v can be powered by a higher volatge with out damaging the unit (it just makes the unit run physically hotter to the touch).  I run my 6v V3 on 9v all the time.  That way you can run the DAT & V3 at 7.5v with a spliter cable that can be made by yourself, me or any of the other cable makers on TS.com.

Here is the instructions to switch the V3 voltage: http://www.taperssection.com/reference/pdf/Manual_Grace_V3_voltage_calibration.pdf
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline Temm

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Re: equipment question battery
« Reply #6 on: June 10, 2010, 01:33:14 PM »
OK, that sounds like a good plan. Once I change out the V3 to 6v, I could run both devices on 1 battery now at 7.5 noce I have the splitter. Who or where could I get the splitter?
thanks again...Tem

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: equipment question battery
« Reply #7 on: June 10, 2010, 01:51:44 PM »
OK, that sounds like a good plan. Once I change out the V3 to 6v, I could run both devices on 1 battery now at 7.5 noce I have the splitter. Who or where could I get the splitter?
thanks again...Tem

I could make you the splitter I am just not familiar with the power connector for you DAT.  I will PM you and we can talk "off line".
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline Temm

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Re: equipment question battery
« Reply #8 on: June 10, 2010, 02:18:45 PM »
thanks that would be great....you can contact me at...
temm@anvilknitwear.com

Tem

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6696
Re: equipment question battery
« Reply #9 on: June 10, 2010, 02:20:07 PM »
I think the tekkon's are way overpriced.. get a dvd battery from ebay for $10.

 

RSS | Mobile
Page created in 0.107 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF