Become a Site Supporter and Never see Ads again!

Author Topic: new 9V li-poly (same size as alkaline 9V)  (Read 6892 times)

0 Members and 1 Guest are viewing this topic.

Offline surf1div1

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 76
  • Gender: Male
9V li-poly with Core Sound MIC 2496
« Reply #15 on: March 01, 2008, 02:18:05 PM »
Just wanted to post about these in terms of using them with the  Core-Sound PD-Audio Setup- the ADC by Core (MIC 2496) that I have draws per Core sound 110 mAH without phantom power, so theoretically I would get about 4.5 hours of power. I went ahead and 'bench' tested it @ home and got 2 hours 40 minutes out of them testing with the green leds on the whole time and the red leds flashing pretty much (the max that anyone would use them without overloading their mics) and that is much better then alkalies. Last night hit for my daughter Cat Power @ the Wiltern and got easily over 100 minutes of recording and additionally the power was on a full 1/2 hour prior to the start of the show waiting for the artist to come out. In any case, for those looking for an alternative in this application, they are the way to go. Purchase both the charger and two batteries for less then $100 from the following source: http://www.thomasdistributing.com/ipower-9v-lithium-rechargeable-battery.php#top
DPA 4061>CHURCH CA UGLY Pre-AMP
>Roland R-07> 32 GB Sandisk Extreme Pro SD

 

RSS | Mobile
Page created in 0.04 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF