I can send you a pic tonight when I get home, but I'll give a description. I removed the screw from one side of the T-bar (the swivel or hinge or what ever) Then I purchased a longer scew a large washer and a 2" piece of small diameter PVC ( I went to home depot and found a small piece of PVC in the area where they have all the connectors and stuff for plumbing. I placed the screw in a small washer, stuck it through the arm (the piece the mic attaches to), then the large washer, then PVC extension, put screw through piece that attaches to the stand, another small washer and lastly a nut to hold it all together. Also a piece of wooden dowel could be used (with a hole drilled in the middle) instead of PVC. I believe the guy who runns the SCI taper web site has a similiar picture posted there. I saw the picture you are talking about and made a few modifications based on what I could find at home depot 5min before they closed. Peace, Matt