Become a Site Supporter and Never see Ads again!

Author Topic: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?  (Read 8850 times)

0 Members and 1 Guest are viewing this topic.

Offline lostockboy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 16
I often see tapers having used SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR to record concerts which is a set up that I have but for whatever reason doesn't work for me due to distortion.  It's mainly the drums that cause the distortion on the recordings that I have made.  I know that the battery box is plugged into the line in input not the mic input so wondered if the settings on the back, especially Mic Gain make a difference or maybe Low Cut or Limiter.  Any advice would be welcome as anyone with the same set up will know that a few quid has been used on this gear   

Offline rhinowing

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4240
  • Gender: Male
    • SPLRA - Smashing Pumpkins Live Recording Association
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #1 on: July 15, 2015, 04:23:48 PM »
change the battery in the bbox
Please contact me if you've ever taped the Smashing Pumpkins or a related group!

Offline aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3883
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #2 on: July 15, 2015, 05:18:59 PM »
4.7k mod?  Can't recall if this is one of the models that needs it...

Offline lostockboy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 16
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #3 on: July 15, 2015, 07:04:55 PM »
change the battery in the bbox
How do you change a new battery??

Offline rhinowing

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4240
  • Gender: Male
    • SPLRA - Smashing Pumpkins Live Recording Association
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #4 on: July 15, 2015, 07:33:28 PM »
change the battery in the bbox
How do you change a new battery??
open up the box and put a fresh one in? unless you literally just put a new one in there
Please contact me if you've ever taped the Smashing Pumpkins or a related group!

Offline lostockboy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 16
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #5 on: July 16, 2015, 04:27:58 AM »
change the battery in the bbox
How do you change a new battery??
open up the box and put a fresh one in? unless you literally just put a new one in there
The times I have used it I've always put a new battery in it

Offline lostockboy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 16
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #6 on: July 16, 2015, 04:32:33 AM »
4.7k mod?  Can't recall if this is one of the models that needs it...
I used the mics without a box when I first got them and again the recordings were distorted.  I'm assuming because there was no box involved that they go into the mic input and not the Line In input.  On another note, there are 2 matching mics connected to one input, will that make a difference?

Offline robertmode

  • Trade Count: (8)
  • Taperssection Regular
  • **
  • Posts: 126
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #7 on: July 16, 2015, 06:27:47 AM »
Hello,
For me 'line in' is too sensitive on r09hr, you should buy r05/r09/microtrack.  ;)
Yours sincerely.
Robert
« Last Edit: July 16, 2015, 09:43:04 AM by robertmode »

Offline lostockboy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 16
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #8 on: July 16, 2015, 07:56:16 AM »
Hello,
For me 'line in' is  too sensitive on r09hr, you should buy r05/r09/microtrack.  ;)
Yours sincerely.
Robert
I'd be quite happy to lay out more expense if I knew they would all work together.  A possibility is maybe I've seen r09 and not r09hr on other tapers recording equipment.  I'm assuming that the r05 and r09 are older models than the r09hr?

Offline robertmode

  • Trade Count: (8)
  • Taperssection Regular
  • **
  • Posts: 126
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #9 on: July 16, 2015, 09:42:16 AM »
r05/r09/microtrack will work for sure.  ;D

r05 is the latest version.

Yours sincerely.
Robert

Offline pillowman

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 618
    • www.openingtime.lima-city.de
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #10 on: July 16, 2015, 11:16:01 AM »
4.7k mod?  Can't recall if this is one of the models that needs it...

these mics need the 4.7k mod !!!
here are some members on the board who can help with this, ...
--
pm
RECORDERS: Sony PCM-A10 / 3x Sony PCM-M10 / TASCAM DR-2d / Sony NH 600 / Sharp MD-MT180(H) / Sony MZ-R35
MICS: LINE AUDIO CM3, AT853c, ATU853c, hc  (4.7k mod) / Sony ECM-717 / 3x Sennheiser ME104
BBox's: Denecke PS-2 / SP-SPSB-9 / SP-SPSB-10 / SP-SPSB-20 / Soundman A3

trading page: www.openingtime.lima-city.de

Offline aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3883
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #11 on: July 16, 2015, 01:02:40 PM »
^^^ I thought so; thanks!  Well, that may very well fix the problem.

Offline lostockboy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 16
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #12 on: July 16, 2015, 02:34:28 PM »
^^^ I thought so; thanks!  Well, that may very well fix the problem.
So what would the 4.7kmod entail?

Offline aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3883
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #13 on: July 16, 2015, 02:44:58 PM »
There are lots of threads about, if you search it.  Here is a post describing it:  http://taperssection.com/index.php?topic=94582.msg1259969#msg1259969...

Offline The Other Chris

  • Trade Count: (26)
  • Taperssection All-Star
  • ****
  • Posts: 1764
  • Gender: Male
    • My list:
Re: SP-CMC-8 + SP-SPSB-11 + EdirolR-09HR - Where Am I Going Wrong?
« Reply #14 on: July 16, 2015, 03:56:06 PM »
^^^ I thought so; thanks!  Well, that may very well fix the problem.
So what would the 4.7kmod entail?

Darktrain is the man for the job!    Does great work & at a great price.

 

RSS | Mobile
Page created in 0.087 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF