So what tips/cable would be needed to run my Edirol UA-5 and Littlebox (with din-3) with this battery? Anyone have an idea?
Wish I was more knowledgeable about this electronic stuff lol!
Thanks!
Here's a thread on tip sizes for lots of the gear we use here...
http://taperssection.com/index.php?topic=150794.0From Ted's list in that link, the battery end of the cable would need the following tip:
Naztech PB15000 Universal Power Bank Charger / 9,12,16,18,19,20,21V / Size N, 5.50mm OD × 2.50mm ID
(Note that the Naztech is the same as this battery. The only difference is branding.)
Here are the details for the UA-5
Edirol UA5 / 9v / Size M, 5.50mm OD × 2.10mm ID / Center pin (-) Ring (+) Reverse Polarity / Know to run off 7.2v w/ no issues
It's important to note that the UA-5 is reverse polarity. It won't run with switched polarity although you won't damage the preamp if you do apply reverse polarity since it's protected...it just won't power on.
For the Littebox with a DIN-3 conector, you'd need...well a DIN-3 connector. LOL.