Become a Site Supporter and Never see Ads again!

Author Topic: Help with my cs dpa 461 mics  (Read 2548 times)

0 Members and 1 Guest are viewing this topic.

Offline leykis 101

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Help with my cs dpa 461 mics
« on: January 30, 2014, 08:18:38 PM »
Ok I seem to have an ongoing problem with mic clamps ???

I have core sounds heb dpa 461 and I love them, (they get awsome sound out of large small loud venues etc)

I have tie clip holders for them, but they keep coming off when I attempt to set up before a show, (I hat mount them)  2 times, I had them drop into a metal grate or fell under the seat of the people infront of me ::)

Anyone have a better suggestion for the clips, as once this happens, I cant do anything except pull the mics and try the recorder only mode with mixed results

Offline beatkilla

  • Trade Count: (70)
  • Needs to get out more...
  • *****
  • Posts: 2114
  • Gender: Male
Re: Help with my cs dpa 461 mics
« Reply #1 on: January 30, 2014, 09:27:32 PM »
how about rubber bands around eye glass frames seems to work best for me in the past

Offline Phil Zone

  • Trade Count: (22)
  • Taperssection All-Star
  • ****
  • Posts: 1038
  • Gender: Male
Re: Help with my cs dpa 461 mics
« Reply #2 on: January 30, 2014, 11:01:44 PM »
As the clips not holding to the mic or are the clips not holding to the hat?
Microphones: AKG 460B, 480B, Naiant Actives,CK1,CK61,CK62,CK63, CK69, Busman BSC-1, CA-14
Preamps: Naiant Littlebox, Naiant Tinyhead
Recorders: Zoom F6, Tascam DR-05

LMA Shows: http://archive.org/search.php?query=taper%3A%22Cam%20Keough%22&sort=-date

Offline yates7592

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 694
  • Gender: Male
Re: Help with my cs dpa 461 mics
« Reply #3 on: January 31, 2014, 03:12:41 AM »
I use the DPA clips with a hat. What I always do is velcro or gaff tape the clip holding the mic into the inside of the hat.

Offline mr qpl

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 516

adrianf74

  • Guest
  • Trade Count: (0)
Re: Help with my cs dpa 461 mics
« Reply #5 on: January 31, 2014, 10:59:59 AM »
What Mr. QPL said.  I use the exact same clips.  Yes they're tad bulkier but they hold the cable well without issue.

Offline leykis 101

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Re: Help with my cs dpa 461 mics
« Reply #6 on: January 31, 2014, 01:14:36 PM »
As the clips not holding to the mic or are the clips not holding to the hat?

thanks for the suggestions. 

My problem is that the clips dont always hold onto the mic cable (as I go to clamp it, it will just fall off, even though i check all of my stuff before putting it together before I go into the venue, (I securely store it inside a dog poop bag, so it wont get bumped around while going into a venue).  I will be trying to attach them, and it will just come off, (not always and if I dont think fast or get lucky where I can just grab it, I am out of luck

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7571
  • Gender: Male
Re: Help with my cs dpa 461 mics
« Reply #7 on: January 31, 2014, 01:23:51 PM »
Do not use elastic bands on these mics.. The cables can handle abuse but the number two reason why these mics fail is the cable the number 1 reason is sweat. Something most tapers don't have to worry about. But don't use anything like elastic and before anyone comments they have been doing it forever. Trust me eventually the mics will fail right were that elastic was.
for warranty returns email me at
EMAIL Sales@church-audio.com

 

RSS | Mobile
Page created in 0.068 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF