Here's a pic of the setup Im doing. Pictured below is where the 100' GAKables XLRs are being installed at the Stage Stop in Rollinsville, CO. The cables will run from the mic stand mounted on top of the rafter FOB about 15' from stage, to the left along the top of the rafter, back down the side wall, then right along the top of the next rafter, down the brick column, meeting up with the snake going to back of SBD, with enough room to run directly into the Midas SBD for matrix, or to the side of the SBD to plug into a rig. This is a way to record without interfering with your tape, but it helps to know the owner and the sound engineer to get approval for such an install.