Taperssection.com
Gear / Technical Help => Photo / Video Recording => Topic started by: dgale on September 20, 2013, 12:00:28 AM
-
Does anyone have any insight on doing time lapse recording on a Canon GL2? Canon refers to it as "Interval Recording" and it looks like I have to choose both the length of time it shoots at each interval (.5 seconds to 2 seconds at 4 intervals: .5, 1, 1.5, and 2 seconds) and the length of the interval between footage (at 4 intervals: 30 sec, 1 min, 5 min., 10 min.) I need to use the camera for work - we are going to demolish a structure that will probably take 2-4 days to remove and I'm wondering what settings would be best?
-
Is 10min the max?If so i think i would choose 1second at 10min intervals of course the camera will be locked on tripod and not moved the entire 4 days correct?And Lock focus and use automatic exposure.
-
On second thought i might lower the 2nd interval to every 5mins or maybe every 1 min.
You using LP mode?Its gonna be alot of wear on the tape mechanism i would imagine.
-
There is a difference between interval recording and time lapse. Basically, tape-based cameras aren't capable of real time lapse because they can't lay down one frame at a time on the cassette. If you want to make a time lapse with the G2 you will have to go back and edit out all but one frame of every interval.
Here is a relatively cheap camera that does time lapse:
http://www.amazon.com/JVC-Picsio-GC-WP10-Waterproof-VERSION/dp/B003Z6QHSK
I have one and it's pretty cool. If you have it plugged in, it'll go for up to 99 hours, taking a frame every half, five, or forty-five seconds. It shoots in high def, although occasionally you do see artifacts from compression. I used it for the exterior shots in this video:
http://www.youtube.com/watch?v=-jZAEECWMOg
-
If you have a smartphone with a decent camera in it that you no longer use, you can deploy it for timelapse photography (I have an Android and I use LapseIt Pro, which cost $1.99). I got a mount for it at Radio Shack, just a cheap plastic spring-loaded bracket with a tripod socket at the bottom that allows me to clamp it wherever I need it. I also connect an external USB battery pack to the phone so that it wouldn't run out of juice. If possible, I would test it for a few days before trusting it on a real job. The advantage of this setup is that I do not risk losing an expensive camera or the phone that I do use.