Become a Site Supporter and Never see Ads again!

Author Topic: DR-44 button stuck  (Read 1801 times)

0 Members and 1 Guest are viewing this topic.

Offline mrfender

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 454
DR-44 button stuck
« on: January 06, 2023, 01:10:26 PM »
So one of the Track/Input buttons on my DR44 is stuck down (not popping back up).  Anyone have experience opening one of these up (and possibly fixing it)?
DR2d, DR-05, DR-22wl, DR-40, DR-44wl, DR-608, PCM-M10, Roland R-07, PCM, PCM-A10
CA-14 card/omni, AT853 cards/omni, Nak CM-300 cards/omni, Line Audio CM4

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: DR-44 button stuck
« Reply #1 on: January 06, 2023, 01:40:52 PM »
Before opening it up you might try cleaning it with compressed air, and if that isn't sufficient, electrical contact cleaner.  May do the trick without sugery.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

 

RSS | Mobile
Page created in 0.088 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF