Become a Site Supporter and Never see Ads again!

Author Topic: Questions about rig - pretty much wrapped up  (Read 5454 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Re:Questions about rig - CHANGED to mic recommendation
« Reply #15 on: March 02, 2004, 12:39:28 PM »
the prices you find online are going to be higher than if you call around and ask for quotes over the phone.  when i was buying sonicsense was the cheapest, don't know if that is still the case.  but then again i bought mine when the dollar was stronger so maybe akg prices have gone up as well.

i have two stands one bogen 3076 (17 ft.) and a bogen 3373 (7 ft.).  i use the 3076 for dmb and the 3373 for just about everything else.

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22376
  • Gender: Male
    • Hurricanes Insider
Re:Questions about rig - CHANGED to mic recommendation
« Reply #16 on: March 02, 2004, 12:51:33 PM »
Even for DMB, running 17 ft is overkill in my opinoin.  I prefer to run at about 11 ft, stack side, which for alot of the amphiteatres will put you about a foot above the subs and a foot below the stacks, which are angled down a bit.  I will then angle my mics up a couple of inches, running XY or DIN (depending on where I physically am in terms of the direction the stacks are pointing out).  This results in more of a natural sound in my opinion.  Running the stand up 17 ft, hugging the stack can produce a really harsh tape.

That being said, the bogen 17 footer is a great tool simply because the bottom is completely flat when it is compacted down, and this will allow me to stick it in between the seats and tape it to the seats without extending the legs and it is secure.

Offline silentmark

  • Shine with or without cherries ?
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 2685
  • Gender: Male
  • Boat, cucumber, wire ...
Re:Questions about rig - CHANGED to mic recommendation
« Reply #17 on: March 02, 2004, 04:10:24 PM »
nmculbreth, your atavar is scaring the hell outta me ...
Dissent is the highest form of patriotism. - Howard Zinn, not Thomas Jefferson ...

Mics: Neumann AK50/AK40/AK30/AK20(1 for M/S), AKG568eb's (gathering dust)
Decks: R-44 (OCM), Fostex FR2LE (OWM), Microtacker (semi-retired), D8 (retired), D7 (retired)
Pre-amps: Apogee Minime (semi-retired), Sonosax SX-M2 (semi-retired), Oade mod SBM-1 (retired)
Cables: LC3 actives (older lemo style x2), Audio Magic Hyper Conductor interconnects

http://www.youtube.com/watch?v=J3qrWOOposQ

Offline Nick Culbreth

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3084
  • Gender: Male
Re:Questions about rig - CHANGED to mic recommendation
« Reply #18 on: March 02, 2004, 09:55:54 PM »
nmculbreth, your atavar is scaring the hell outta me ...


what... tino rawks!   :)

Offline mgleason007

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 356
  • Gender: Male
  • Mmmmm, yummy
    • My Bootleg List
Re:Questions about rig - pretty much wrapped up
« Reply #19 on: March 05, 2004, 02:13:37 AM »
Thanks all for the help... and now that I'm at 50 posts +T's around :)
Mike

 

RSS | Mobile
Page created in 0.073 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF