Become a Site Supporter and Never see Ads again!

Author Topic: Seeking advice on good stand for stereo bar  (Read 5924 times)

0 Members and 1 Guest are viewing this topic.

Offline uconnwes

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
Seeking advice on good stand for stereo bar
« on: July 01, 2019, 11:03:57 AM »
Hi - does anyone have recommendations for a good lighting stand or lightweight tri-pod I can purchase.  This is my first rig, guess I need something in 12'-15' height range.  Will be attaching Rode Microphones Stero Bar to the tripod.  Hoping to grab something lightweight on Amazon.  TIA

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Seeking advice on good stand for stereo bar
« Reply #1 on: July 01, 2019, 05:09:50 PM »
What types of places will you be recording in?  Also do you have clamps?  I bet there are people on here who get more use out of their clamps than their stands.

Even though I have a quality stand that goes higher, I probably use this stand more: https://www.bhphotovideo.com/c/product/612771-REG/Manfrotto_5001B_5001B_Nano_Black_Light.html
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline DavidPuddy

  • Trade Count: (18)
  • Taperssection All-Star
  • ****
  • Posts: 1799
  • If it's too loud, turn it down.
Re: Seeking advice on good stand for stereo bar
« Reply #2 on: July 01, 2019, 05:15:07 PM »
I use my Manfrotto 099b extension pole and light stand base more than I do my stand, like Heathen said. With the base, the extension pole gets up to a bit over 7.5 ft. You can also use the base and pole separately. For example, attach a super clamp to the pole and you can clamp to the soundboard and get above the crowd and use the base as a low profile stand on stage.

Whichever way you go, there's no shortage of ways to spend money in this hobby.
Mics: mk4v/mk41v/mk22 > CMC1L/Nbobs, 4061, MKE2
Preamps: Mixpre-D, Nbox Platinum ABS
Recorders: Mixpre-6 ii, PCM-A10

Offline aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3861
Re: Seeking advice on good stand for stereo bar
« Reply #3 on: July 01, 2019, 06:38:19 PM »
If ~12' is enough, try the Manfrotto 1004BAC. Pretty solid and not too heavy. If weight isn't a concern, look at the K & M stands; they are rock solid but pretty weighty. If you are going to tape a lot of bands with talkative crowds, ask the DMB tapers. They often run as high as they can to avoid some of the "yo, brah" chatter...

Offline jb63

  • Site Supporter
  • Trade Count: (31)
  • Taperssection Member
  • *
  • Posts: 957
  • Gender: Male
  • if not now when?
Re: Seeking advice on good stand for stereo bar
« Reply #4 on: July 01, 2019, 06:48:00 PM »
I swear by the Manfrotto 1004BAC, but sometimes (in tight spaces) the platform is too wide. Unfortunately, you usually don't find out until you get there.
once again, lost in all the noise


Offline goodcooker

  • Trade Count: (43)
  • Needs to get out more...
  • *****
  • Posts: 4638
  • Gender: Male
  • goes to 11
Re: Seeking advice on good stand for stereo bar
« Reply #6 on: July 01, 2019, 10:57:56 PM »
10000% http://taperssection.com/index.php?topic=185096.0

this stand: https://www.bhphotovideo.com/c/product/1074706-REG/photek_ls_8122_3_section_10_folding_light.html

I agree 100% on this stand. I never really need to get higher than 10 feet and it is really versatile. If you really do need to go to 15 feet it obviously won't work for you.

The reverse folding legs are the best thing ever.
Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline voltronic

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 4104
Re: Seeking advice on good stand for stereo bar
« Reply #7 on: July 02, 2019, 07:03:46 AM »
I will add another enthusiastic recommendation on the Manfrotto 1004BAC.  I used a couple of the much cheaper stands before getting the Manfrotto, and while they worked, the 1004 is so much better in build quality and reliability.  That translates to confidence that your mics are going to be safe and secure up there for a concert.  Once I got this stand, I wished I had just bought this in the first place.

I also own the Manfrotto 099B which is great, but I only use that with a clamp for attaching to a railing, or as an extension for the 1004 when I need to go really high.

If you get the 1004BAC, I highly recommend picking up this bag to carry it in (recommended by another member here).  You will swear it was custom made for this stand and not for a lacrosse stick.
https://www.amazon.com/STX-Essential-Womens-Stick-Bag/dp/B002BDI0D8

You also should get a weight for it to add stability, something around 8-10 lbs.  This is especially important when running the stand at full height.  The cheapest option for that is a sand bag:
https://www.amazon.com/Neewer-22x22cm-Photographic-Sandbag-Studio/dp/B00JHCX6US/

I have since moved on to one of these weights, which gives you high mass in a small package:
https://www.amazon.com/Neewer-Light-Stand-Boom-Counterweight/dp/B07GX99R2D/

^ That is essentially a knockoff of the Manfrotto 023 weight, which is quite expensive for what it is:
https://www.bhphotovideo.com/c/product/5352-REG/Manfrotto_023_023_Counter_Balance_Weight.html

Impact makes one also:
https://www.bhphotovideo.com/c/product/917863-REG/impact_lsa_cw10_counter_weight_10_lb_4_5.html
I am hitting my head against the walls, but the walls are giving way.
- Gustav Mahler

Acoustic Recording Techniques
Team Classical
Team Line Audio
Team DPA

Offline uconnwes

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
Re: Seeking advice on good stand for stereo bar
« Reply #8 on: July 03, 2019, 12:11:17 PM »
Thanks so much folks.  Funny, I vectored in on 1004BAC on my own so good to know I made a solid choice.  Thanks for the tips on bags and weights too!

Offline goodcooker

  • Trade Count: (43)
  • Needs to get out more...
  • *****
  • Posts: 4638
  • Gender: Male
  • goes to 11
Re: Seeking advice on good stand for stereo bar
« Reply #9 on: July 06, 2019, 10:06:44 AM »

I have never carried a weight to a live performance recording. I try to cut down on the pounds I'm carrying not the other way around.

I use a stand with the appropriate spread of footprint to accomplish what I want to do - another reason I recommend the Photek stand. The footprint goes from very narrow to extremely wide providing all the stability you need.
Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: Seeking advice on good stand for stereo bar
« Reply #10 on: July 06, 2019, 10:23:06 AM »

I have never carried a weight to a live performance recording. I try to cut down on the pounds I'm carrying not the other way around.

Same.  Some tape can do a good enough job of keeping the stand anchored.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline if_then_else

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 428
Re: Seeking advice on good stand for stereo bar
« Reply #11 on: July 06, 2019, 02:48:41 PM »

I have never carried a weight to a live performance recording. I try to cut down on the pounds I'm carrying not the other way around.

Same.  Some tape can do a good enough job of keeping the stand anchored.

+1

If you really have to weigh down your tripod, you can still re-purpose some plastic water bottles (which are likely to be available on-site) or bring some collapsible water bottles and fill them in the bathroom. Just make sure the bottles don't leak. Electricity and water don't mix well.

Offline thunderbolt

  • Trade Count: (37)
  • Taperssection All-Star
  • ****
  • Posts: 1030
  • Gender: Male
  • Music est vita!
Re: Seeking advice on good stand for stereo bar
« Reply #12 on: July 07, 2019, 12:30:45 AM »
I bring an ankle weight, 10#.  Tent stakes are also helpful if yer in the dirt.

Offline pohaku

  • Site Supporter
  • Trade Count: (35)
  • Taperssection All-Star
  • *
  • Posts: 1091
  • Gender: Male
Re: Seeking advice on good stand for stereo bar
« Reply #13 on: July 07, 2019, 09:59:40 PM »
Gaff tape cures a multitude of sins.
Mics: akg c460 (ck61, ck63), c414buls, c568eb; at4049a, 4051a, 4053a, at853; josephson c42; neumann U87, km84i; beyer m130, m160, m500; aea r84; gefell m71, mt711s, m200, m201, um70S; sony c38; schoeps cmc6, CMBI (mk4, mk21, mk41, mk4v); sennheiser mkh30, mkh40, md421, md431, md541; audix m1290
Pres: API, a-designs, pendulum, purple, millennia TD-1 and HV-32P, gt, littlebox, tinybox, usbpre2, CA 9200, pipsqueak, grace V2, DAV BG1
Cables: KCY, CMR, Naiant AKG actives, PFAs, asst.  GAKables and Darktrain
Recorders/converters/monitors: dr680, m10, dr-2d, d50, zoom f8 & F8n pro, 788T SSD CL-8, lynx aurora 8, Neumann KH20


Yeah, I'm an attorney, but everyone needs a day job

Offline voltronic

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 4104
Re: Seeking advice on good stand for stereo bar
« Reply #14 on: July 08, 2019, 11:53:19 AM »
Gaff tape cures a multitude of sins.

I gaff down my spindly carbon fiber stand for my DPAs, but when using the 1004BAC at full height, especially with the 099b as a boom arm, I feel like a weight is mandatory.  Some of the places I record have my stand sitting on a carpeted area, and gaff tape isn't good for holding down much more than cables there.
I am hitting my head against the walls, but the walls are giving way.
- Gustav Mahler

Acoustic Recording Techniques
Team Classical
Team Line Audio
Team DPA

 

RSS | Mobile
Page created in 0.127 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF