« on: January 22, 2012, 06:33:12 PM »
Don't know where this beast fits it.
Last time I checked the weak spot for all these iphone devices was the 16bit recording capacity limitation.
MSRP $149.
It has a battery lid, but it doesn't say anything about battery specs or running time on P48.
Video preview here:
http://news.hitsquad.com/ComputerGear/NAMM_2012_Tascam_iU2TASCAM’s iU2 is a premium sound quality audio interface for the iPad, iPhone and iPod Touch. It includes all of the features of TASCAM’s best-selling USB audio interfaces, including a pair of great-sounding microphone inputs. The XLR inputs have phantom power for use with high-quality condenser microphones. These feed an onboard microphone preamp and A/D converter for better sound performance than those built into iPhone and iPad – true stereo recording with low noise and less tendency to distort. The inputs also accept line-level signals or you can plug a guitar or bass directly into your device.
In addition to compatibility with iOS devices, the iU2 also works with Mac and Windows computers. A zero-latency monitoring path allows musicians to hear themselves directly through the unit, without any distracting delay. MIDI in and out are provided to interface with synths and drum machines, and a digital output connects to digital mixers or recorders.
Audio/MIDI Interface for Mac, Windows and iOS devices
Compatible with iPhone, iPad and iPod Touch
Two XLR mic inputs with phantom power
Two balanced line inputs
Instrument-level input for guitar or bass
MIDI in and out
Onboard A/D conversion for low-noise and distortion when recording with iOS devices
Zero-latency direct monitoring
S/PDIF Digital Output
Includes USB cable, iOS dock connection cable, XLR to ¼” conversion cables
Logged
Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc), ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800