Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: NOLAfishwater on February 05, 2009, 05:50:04 PM
-
I can make any of the following mounts for Neumanns
DIN
DINa
NOS
ORTF
M/S
Please let me know what you want in specific by email only: louie.liokis @ gmail dot com
in the subject line put: Neumann Mount
Update 4/8/09: I just picked them up and they are ready to ship.
DINa
(http://i140.photobucket.com/albums/r38/NOLAfishwater/DINa.jpg)
ORTF
(http://i140.photobucket.com/albums/r38/NOLAfishwater/ORTF.jpg)
DIN
(http://i140.photobucket.com/albums/r38/NOLAfishwater/DIN.jpg)
NOS
(http://i140.photobucket.com/albums/r38/NOLAfishwater/NOS.jpg)
MIDSIDE
(http://i140.photobucket.com/albums/r38/NOLAfishwater/MIdside.jpg)
(http://i140.photobucket.com/albums/r38/NOLAfishwater/Midside2.jpg)
-
I am thinking about making just the following bars for Neumanns
DIN
DINa
NOS
ORTF
M/S
Please let me know what you want in specific by email only: louie.liokis @ gmail dot com
in the subject line put: Neumann Mount
Once I have received enough interest I will entertain the idea of making some.
As of now I can probably just make the M/S bar.
MS bar would be sweet. I saw the picture of the schoeps one. I would guess if its held tight at the top with the rubber band, both schoeps and neumanns will fit in the bar...
-
here's your email :P
i want a NOS one
-
like I said. please email me :P that is the only way I can keep track of all of yous.
-
what kind of prices would we be looking at?
-
email sent! M/S and ORTF. Yer welcome to borrow my caps and actives for a few weeks as well.
-
what kind of prices would we be looking at?
I don't know, b/c I don't even have enough interest to get pricing. Let me know what you are interested in.
-
Email sent. ORTF! :P
-
Come on people. So far I only have interest in the following:
4 ORTF burgin, bhadella, dgale, mcraig
2 NOS dgale, gordon, rob D.,
2 M/S burgin, mcraig
1 DIN dgale
1 DINa dgale
I need at least 5 of each to make a run.
-
Actually I should be down for one of each except the ORTF, so add me to the M/S list and delete me from the ORTF list. Thanks.
-
email sent: DIN and ORTF
-
4 ORTF burgin, bhadella, mcraig, dmonkey
3 NOS dgale, gordon, rob D.,
4 M/S burgin, mcraig, dgale, steve j
3 DIN dgale, dmonkey, steve j
2 DINa dgale, steve j
prices are $75 each. discounts on quantity are given.
-
4 ORTF burgin, bhadella, mcraig, dmonkey
3 NOS dgale, gordon, rob D.,
4 M/S burgin, mcraig, dgale, steve j
3 DIN dgale, dmonkey, steve j
2 DINa dgale, steve j
prices are $75 each. discounts on quantity are given.
Do we have a 5th person for the ORTF bars yet? :drool:
-
FWIW Louie, as much as I read TS.com, today is the first I ran across your announcement because I just don't look for gear related stuff in the open forum and, honestly, I don't spend much time at all in the open forum. I also know that there are others that avoid it like the plague because of so many politically charged threads.
I wouldn't be so sure that people are getting the word on this.
-
Email sent. Definately m/s, potentially one of each. The budget will decide...
-
Looks like dgale backed out
4 ORTF burgin, bhadella, mcraig, dmonkey
2 NOS gordon, rob D.,
3 M/S burgin, mcraig, steve j,hubbachild
2 DIN dmonkey, steve j
1 DINa steve j
prices are $75 each. discounts on quantity are given.
-
Email sent. Definately m/s, potentially one of each. The budget will decide...
never got your email
-
Update: Looks like there are enough for M/S and ORTF. My guess is it will probably be mid April before these are finished
5 ORTF burgin, bhadella, mcraig, dmonkey, ncknottypine
3 NOS gordon, rob D.,ncknottypine
5 M/S burgin, mcraig, steve j,hubbachild, ncknottypine
2 DIN dmonkey, steve j
1 DINa steve j
prices are $75 each. discounts on quantity are given.
-
would this bar be for the KM180 series at all?
-
would this bar be for the KM180 series at all?
these will only be compatible with the active cable. sorry
-
Update: Looks like there are enough for M/S and ORTF. My guess is it will probably be mid April before these are finished
5 ORTF burgin, bhadella, mcraig, dmonkey, ncknottypine
3 NOS gordon, rob D.,ncknottypine
5 M/S burgin, mcraig, steve j,hubbachild, ncknottypine
2 DIN dmonkey, steve j
1 DINa steve j
prices are $75 each. discounts on quantity are given.
Thanks Louie for helping out us Neumann owners. Do you need payment before hand?
Mikey
-
I met with the design engineer today. Finalized the last couple of templates. Everything should be done in the next 30 days.
-
email sent ORTF DIN & NOS
-
would this bar be for the KM180 series at all?
these will only be compatible with the active cable. sorry
KM 180-D series have removeable heads - OK with these?
Also - any useable with Sennheiser MKH 8000 series?
Please ........... ;D
-
Update: Unless I get more interest on the DINa, I am probably going to cut it from this run. My guess is it will probably be mid April before these are finished
5 ORTF burgin, bhadella, mcraig, dmonkey, ncknottypine,neptune
3 NOS gordon, rob D.,ncknottypine,neptune
5 M/S burgin, mcraig, steve j,hubbachild, ncknottypine
2 DIN dmonkey, steve j,neptune
1 DINa steve j
prices are $75 each. discounts on quantity are given.
-
Update: Unless I get more interest on the DINa, I am probably going to cut it from this run. My guess is it will probably be first week of April before they are done. Since I have committed financially to the project, I need to start accepting payments for them.
5 ORTF burgin, bhadella, mcraig, dmonkey, ncknottypine,neptune
4 NOS gordon, rob D.,ncknottypine,neptune
5 M/S burgin, mcraig, steve j,hubbachild, ncknottypine
3 DIN dmonkey, steve j,neptune
1 DINa steve j
prices are $75 each. discounts on quantity are given.
-
Thanks to everyone who sent payment. Still have the following stock:
1 x NOS
2 x DIN
4 x DINa
-
I have two omni bars that will work with the Neumanns. Each bar has two different spacing options 17" (43cm) and 20" (51cm). There is a 3rd inner inner hole but is too small for the Neumanns and will only fit the Schoeps. Price is $125. Let me know.
-
Are you treating my Neumanns nice Louie? Give em a kiss for me. :P
-
Are you treating my Neumanns nice Louie? Give em a kiss for me. :P
they might be a little sticky when they get back to you >:D
-
production started on them today.
-
Just picked them up. I will ship them all out in the morning
DINa
(http://i140.photobucket.com/albums/r38/NOLAfishwater/DINa.jpg)
ORTF
(http://i140.photobucket.com/albums/r38/NOLAfishwater/ORTF.jpg)
DIN
(http://i140.photobucket.com/albums/r38/NOLAfishwater/DIN.jpg)
NOS
(http://i140.photobucket.com/albums/r38/NOLAfishwater/NOS.jpg)
MIDSIDE
(http://i140.photobucket.com/albums/r38/NOLAfishwater/MIdside.jpg)
(http://i140.photobucket.com/albums/r38/NOLAfishwater/Midside2.jpg)
-
;D
-
just got my NOS bar and it's very nice! I gotta say the caps fit a bit snugger (in a good way) in the bar than in my kwon din bar ;D
-
Yep. I'm very happy with the ortf. So nice to have a real one again besides my ghetto version. ;D Thanks to Louie. Now I need an AK20 for the ms mount. (which is great, perfect, etc) :P
-
just got my NOS bar and it's very nice! I gotta say the caps fit a bit snugger (in a good way) in the bar than in my kwon din bar ;D
that is what I was going for. you can always add one rubber seal to make it extra secure.
Yep. I'm very happy with the ortf. So nice to have a real one again besides my ghetto version. ;D Thanks to Louie. Now I need an AK20 for the ms mount. (which is great, perfect, etc) :P
glad you like it. now go find an AK20. I want to hear some midside pickin
-
just got mine yesterday and they look sweet
cant wait till this weekend to test them out
-
any of you Neumann owners interested in making some of these?
-
any of you Neumann owners interested in making some of these?
I'm interested in NOS and ORTF (and possibly DIN).
-
I am thinking of making another batch, please see the thread in the retail section for instructions on reserving a set. http://taperssection.com/index.php?topic=156323.0