Become a Site Supporter and Never see Ads again!

Author Topic: Dissecting the Radio Shack A/D converter...  (Read 6804 times)

0 Members and 1 Guest are viewing this topic.

hexyjones

  • Guest
  • Trade Count: (0)
Dissecting the Radio Shack A/D converter...
« on: February 13, 2005, 12:08:00 PM »
Not sure why...but just to see whats inside this cheap thing.

Well - easier said than done...

Im not sure I've ever seen anything put together this well...

Im not sure I can actually get it apart...!

It's totally soldered shut...and when I got as far as pic - the board is soldered to the case - like 2 inches of seam - all solder...

I used some solder absorbing braid - that worked well...Incredible they used so much solder in this thing...

Should I go any further?

hexyjones

  • Guest
  • Trade Count: (0)
Re: Dissecting the Radio Shack A/D converter...
« Reply #1 on: February 13, 2005, 01:57:30 PM »
Ok cracked it open...

hexyjones

  • Guest
  • Trade Count: (0)
Re: Dissecting the Radio Shack A/D converter...
« Reply #2 on: February 13, 2005, 01:58:41 PM »
The chip is Toshiba

http://www.datasheetarchive.com/datasheet/pdf/62/62041.html

Doesn't look so hot...

Offline dklein

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1184
  • Gender: Male
Re: Dissecting the Radio Shack A/D converter...
« Reply #3 on: February 13, 2005, 10:48:51 PM »
no, it doesn't but I always like seeing stuff opened up  ;D  +t
KM 184 > V2 > R4
older recording gear: UA-5  / emagic A62 / laptop / JB3 / CSB / AD20 / Sharp MT-90 / Sony MDS-JE510
Playback: Pioneer DV-578 > Lucid DA 9624 >many funny little british boxes > Linn Isobarik PMS

Offline Sanjay

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 5705
  • Gender: Male
  • www.drivebytruckers.com/tourdiary.html
Re: Dissecting the Radio Shack A/D converter...
« Reply #4 on: February 22, 2005, 06:43:01 AM »
Thanks for showing us the insides, its a shame that this thing isn't better a/d quality with the type of construction and size, it could make a nice a/d. Is it possible to switch out the toshiba chip for something more suited to our needs?  I don't know much about that just throwing out the idea.
mics & cameras

Offline JackoRoses

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2836
  • Gender: Male
  • lost cause
Re: Dissecting the Radio Shack A/D converter...
« Reply #5 on: February 22, 2005, 06:58:46 AM »
Thanks for showing us the insides, its a shame that this thing isn't better a/d quality with the type of construction and size, it could make a nice a/d. Is it possible to switch out the toshiba chip for something more suited to our needs? I don't know much about that just throwing out the idea.
That is a great idea, if you could stick a brown burr A/D chip in there it would be a dramatic improvement in quality.
+T for taking stuff apart
http://www.archive.org/bookmarks/jackoroses
AKG ck61's/ck62's/ck63's/480b's > zaolla's/Dogstar silver cables > optimod V3  > zaolla spdif> HD-P2
"None are more hopelessly enslaved than those who falsely believe they are free. "
Johann Wolfgang von Goethe

Big Brother is here and he is watching you.

hexyjones

  • Guest
  • Trade Count: (0)
Re: Dissecting the Radio Shack A/D converter...
« Reply #6 on: February 23, 2005, 10:23:34 AM »
Hold tight - Im gonna hafta break out the jewlers scope -  they eyes can do that anymore...!!!

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Dissecting the Radio Shack A/D converter...
« Reply #7 on: February 24, 2005, 03:49:44 AM »
is it an a/d converter or a digital signal converter like going coax>optical
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Sanjay

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 5705
  • Gender: Male
  • www.drivebytruckers.com/tourdiary.html
Re: Dissecting the Radio Shack A/D converter...
« Reply #8 on: February 24, 2005, 05:23:04 AM »
is it an a/d converter or a digital signal converter like going coax>optical

a/d, rat shack carries both
mics & cameras

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Dissecting the Radio Shack A/D converter...
« Reply #9 on: February 24, 2005, 05:42:37 AM »
is it an a/d converter or a digital signal converter like going coax>optical

a/d, rat shack carries both

nice, +T sanjay, i had no clue they actually sold an a/d converter ;)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Sanjay

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 5705
  • Gender: Male
  • www.drivebytruckers.com/tourdiary.html
Re: Dissecting the Radio Shack A/D converter...
« Reply #10 on: February 24, 2005, 06:13:48 AM »
is it an a/d converter or a digital signal converter like going coax>optical

a/d, rat shack carries both

nice, +T sanjay, i had no clue they actually sold an a/d converter ;)

stumbled across it one day on sale for 9.99, lost it in the move over here though so I never had a chance to try it out.
mics & cameras

Offline jk labs

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 191
  • Gender: Male
  • Straight wire!
    • Mics, pre and ADC...
Re: Dissecting the Radio Shack A/D converter...
« Reply #11 on: February 27, 2005, 02:17:10 PM »
Hold tight - Im gonna hafta break out the jewlers scope -  they eyes can do that anymore...!!!

hrmmmmm...

hexyjones

  • Guest
  • Trade Count: (0)
Re: Dissecting the Radio Shack A/D converter...
« Reply #12 on: February 27, 2005, 03:21:08 PM »
How's this...

Offline tms

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 429
  • Gender: Male
Re: Dissecting the Radio Shack A/D converter...
« Reply #13 on: February 28, 2005, 01:37:28 PM »
Is all of that shielding to protect from RF noise?



Im not sure I've ever seen anything put together this well...

Im not sure I can actually get it apart...!

It's totally soldered shut...and when I got as far as pic - the board is soldered to the case - like 2 inches of seam - all solder...

I used some solder absorbing braid - that worked well...Incredible they used so much solder in this thing...
"Beer is proof that God loves us and wants us to be happy" - Ben Franklin

SP-CMC-4 (AT853) > SP battery box > Edirol R-09

Offline tms

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 429
  • Gender: Male
Re: Dissecting the Radio Shack A/D converter...
« Reply #14 on: February 28, 2005, 01:38:34 PM »
This link doesn't open for me. 

What specs do you see that aren't so hot? 


The chip is Toshiba

http://www.datasheetarchive.com/datasheet/pdf/62/62041.html

Doesn't look so hot...
"Beer is proof that God loves us and wants us to be happy" - Ben Franklin

SP-CMC-4 (AT853) > SP battery box > Edirol R-09

 

RSS | Mobile
Page created in 0.229 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF