Become a Site Supporter and Never see Ads again!

Author Topic: Looks like DPA is making a series with removable caps  (Read 31080 times)

0 Members and 1 Guest are viewing this topic.

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Looks like DPA is making a series with removable caps
« Reply #75 on: December 10, 2011, 02:50:22 AM »
I just got a pair of the new modulars...I think they are about a half inch longer than the CCM4s

They look fairly long, probably closer to an inch longer than the CCMs.

the CCM4s are 20x58 (mm) and the DPAs w/ caps other than the 2011/4017 are at the largest 19x64 (mm), so a 1/4 inch difference in length.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Looks like DPA is making a series with removable caps
« Reply #76 on: December 10, 2011, 10:38:56 AM »
Just omnis or cards/hypers/subs as well ???
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline StuStu

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 2860
  • Gender: Male
Re: Looks like DPA is making a series with removable caps
« Reply #77 on: December 10, 2011, 12:30:09 PM »
Just omnis or cards/hypers/subs as well ???


The available caps are card, wide card, omni and shotgun.
MK5, MK8, MK41, KM184D, CK77, B3 ---CMD 2U XT, KC5, KCY, AKI---KCY Tinybox, Ugly BB---AETA 4MinX, PMD661 MKII, R-26, M-10, MR-1

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Looks like DPA is making a series with removable caps
« Reply #78 on: December 10, 2011, 02:05:41 PM »
Just omnis or cards/hypers/subs as well ???


The available caps are card, wide card, omni and shotgun.

Nice. Just wish they had hypers :(
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline StuStu

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 2860
  • Gender: Male
Re: Looks like DPA is making a series with removable caps
« Reply #79 on: December 10, 2011, 02:24:04 PM »
Just omnis or cards/hypers/subs as well ???


The available caps are card, wide card, omni and shotgun.

Nice. Just wish they had hypers :(


I do too.
MK5, MK8, MK41, KM184D, CK77, B3 ---CMD 2U XT, KC5, KCY, AKI---KCY Tinybox, Ugly BB---AETA 4MinX, PMD661 MKII, R-26, M-10, MR-1

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Looks like DPA is making a series with removable caps
« Reply #80 on: December 10, 2011, 02:44:42 PM »
I'll bite, other than using the longer gun caps (which looking at the polar pattern are just ultra-hypers), why? Just the size of the capsule?
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline datbrad

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2301
  • Gender: Male
Re: Looks like DPA is making a series with removable caps
« Reply #81 on: December 10, 2011, 03:09:17 PM »
My buddy Jeff has this short body set with a range of capsules, including the 4017s and confirmed to me they are basically hypers as far as performance results, not strict shotguns as typically seen by other brands.
AKG C460B w/CK61/CK63>Luminous Monarch XLRs>SD MP-1(x2)>Luminous Monarch XLRs>PMD661(Oade WMOD)

Beyer M201>Luminous Monarch XLRs>PMD561 (Oade CMOD)

Offline StuStu

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 2860
  • Gender: Male
Re: Looks like DPA is making a series with removable caps
« Reply #82 on: December 10, 2011, 03:30:41 PM »
I'll bite, other than using the longer gun caps (which looking at the polar pattern are just ultra-hypers), why? Just the size of the capsule?


I've always wondered what a DPA hyper would sound like.


Quote
My buddy Jeff has this short body set with a range of capsules, including the 4017s and confirmed to me they are basically hypers as far as performance results, not strict shotguns as typically seen by other brands.

Interesting. Does he have any shows torrented or on the Archive with the shotguns?
MK5, MK8, MK41, KM184D, CK77, B3 ---CMD 2U XT, KC5, KCY, AKI---KCY Tinybox, Ugly BB---AETA 4MinX, PMD661 MKII, R-26, M-10, MR-1

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Looks like DPA is making a series with removable caps
« Reply #83 on: December 10, 2011, 03:44:21 PM »
I'll bite, other than using the longer gun caps (which looking at the polar pattern are just ultra-hypers), why? Just the size of the capsule?


I've always wondered what a DPA hyper would sound like.


Quote
My buddy Jeff has this short body set with a range of capsules, including the 4017s and confirmed to me they are basically hypers as far as performance results, not strict shotguns as typically seen by other brands.

Interesting. Does he have any shows torrented or on the Archive with the shotguns?

I, too, would LOVE to hear a set myself :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15735
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Looks like DPA is making a series with removable caps
« Reply #84 on: December 10, 2011, 03:56:25 PM »
Those look really nice, & not as large as I was worried they might be.
I'd really like to hear the 4017 on music too.  Please post a link if anyone finds one.

Different line of course, but there is the 4098 miniature supercardioid choir mic, too.  I've heard some very nice and clear sounding music samples, but it's response is a bit light down low.
[edit- here's the polar plot for the 4099, which is the same mic with less sensitivity for close instrument mic'ing]-



DPA 4007 is the metal (Nickel?) diaphragm, right?  Closest I've got is Nevaton and/or Countryman B3.  Both use stainless steel.

The only all metal foil diaphram mics (ie: not gold sputtered) I have other than the B3s are Gefell M94 cardioid caps with nickel diaphrams which I just got back from Germany a couple weeks ago, repaired re-skinned and matched.  Wooo.

The all metal DPA omni diaphrams are nickel I think. Many measurement omnis besides B&K/DPA use pure stainless steel or titanium foil as well, as opposed to some sort of plastic coated with a very thin layer of metal (usually aluminum or gold). As I understand it the primary reasoning behind doing so in a modern microphone is for less potential for slight measurement variations with age and/or change in environmental conditions such as temperature.
« Last Edit: December 10, 2011, 06:31:00 PM by Gutbucket »
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15735
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Looks like DPA is making a series with removable caps
« Reply #85 on: December 10, 2011, 06:25:03 PM »
Searching around I came across the DPA Mic University page on microphone stability (mentioning diaphram material choice)-
http://www.dpamicrophones.com/en/Mic-University/Technology-Guide/Microphone%20Stability.aspx
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline StuStu

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 2860
  • Gender: Male
Re: Looks like DPA is making a series with removable caps
« Reply #86 on: December 10, 2011, 06:51:05 PM »
Searching around I came across the DPA Mic University page on microphone stability (mentioning diaphram material choice)-
http://www.dpamicrophones.com/en/Mic-University/Technology-Guide/Microphone%20Stability.aspx


I'll take their word that it's okay to dunk a DPA in water. :P
MK5, MK8, MK41, KM184D, CK77, B3 ---CMD 2U XT, KC5, KCY, AKI---KCY Tinybox, Ugly BB---AETA 4MinX, PMD661 MKII, R-26, M-10, MR-1

Offline stober

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1630
  • Gender: Male
Re: Looks like DPA is making a series with removable caps
« Reply #87 on: December 10, 2011, 07:21:43 PM »
My buddy Jeff has this short body set with a range of capsules, including the 4017s and confirmed to me they are basically hypers as far as performance results, not strict shotguns as typically seen by other brands.
correct

Offline justink

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1973
  • Gender: Male
Re: Looks like DPA is making a series with removable caps
« Reply #88 on: December 10, 2011, 10:46:44 PM »
The compacts are not going away. Their application cannot be matched by this modular system, even with the short body.

My friend was told by DPA that the compacts are in fact going away.

Doesn't surprise me at all.  Their product line has changed quite a bit even over the last 12-18 months.   Lots of new products.  Lots of new microphone systems.    To be honest i'm surprised no one has tried using a 4099 in the field yet.

trust me, i've thought about it.
Mics:
DPA 4023 (Cardioid)
DPA 4028 (Subcardioid)
DPA 4018V (Supercardioid)
Earthworks TC25 (Omni) 

Pres and A/D's:
Grace Design Lunatec V3 (Oade ACM)
Edirol UA-5 (bm2p+ Mod)

Recorders:
Sound Devices MixPre10 II
Edirol R-44 (Oade CM)
Sony PCM‑M10

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8677
  • Gender: Male
Re: Looks like DPA is making a series with removable caps
« Reply #89 on: December 10, 2011, 10:53:34 PM »
my thoughts on hypers has always been this:

if you need a hypercard, move closer

 

RSS | Mobile
Page created in 0.077 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF