Become a Site Supporter and Never see Ads again!

Author Topic: bnc connectors for VMS  (Read 3655 times)

0 Members and 1 Guest are viewing this topic.

Offline tubems

  • Trade Count: (10)
  • Taperssection Regular
  • **
  • Posts: 137
  • local idiot
bnc connectors for VMS
« on: August 17, 2015, 08:42:12 PM »
afternoon

does anyone know where i can get BNC connectors like the ones in this picture, I'm making up cables for VMS.  I think rob, dark train made these.

thanks

dan
------------
local idiot

Offline darktrain

  • Trade Count: (702)
  • Needs to get out more...
  • *****
  • Posts: 2860
  • Gender: Male
  • Whats next?
Re: bnc connectors for VMS
« Reply #1 on: August 17, 2015, 09:55:52 PM »
afternoon

does anyone know where i can get BNC connectors like the ones in this picture, I'm making up cables for VMS.  I think rob, dark train made these.

thanks

dan

Or you could just ask ;D , those are nice solid solder bnc's and you can get em at Redco

Offline tubems

  • Trade Count: (10)
  • Taperssection Regular
  • **
  • Posts: 137
  • local idiot
Re: bnc connectors for VMS
« Reply #2 on: August 17, 2015, 10:18:28 PM »
Haha, I could of.  But I  wasn't able to figure out how to attach a picture to a pm, haha
------------
local idiot

Offline F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (121)
  • Needs to get out more...
  • *****
  • Posts: 40577
  • Gender: Male
  • Taperus Maximus
Re: bnc connectors for VMS
« Reply #3 on: March 29, 2016, 03:39:40 AM »
I think I want some BNC>XLR cables exactly like this for my VMS>70d setup!
Schoeps MK4's | MK41's ->
Schoeps | NBob 250/05 KCY's ->
Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's ->
DarkTrain Right Angle Stubby | GakCable XLR's ->
Sound Devices MixPre-6 | Tascam DR-70D ->
128gb | 64gb SanDisk Extreme Pro SDXC-I

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline caymanreview

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 9765
  • Gender: Male
    • shows ive taped  that are in circulation
Re: bnc connectors for VMS
« Reply #4 on: March 29, 2016, 09:12:41 AM »
I just had Ted whip me up right angle bnc > chopped right angle 1/4 trs for my vms > zoom f8


Offline F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (121)
  • Needs to get out more...
  • *****
  • Posts: 40577
  • Gender: Male
  • Taperus Maximus
Re: bnc connectors for VMS
« Reply #5 on: March 29, 2016, 11:14:51 AM »
I just had Ted whip me up right angle bnc > chopped right angle 1/4 trs for my vms > zoom f8



Very nice Dustin 8)

Any reason for going with 1/4" TRS plugs instead of locking XLR's? I have right-angle stubby XLR's for my 70D and they are super low-profile AND lock into place! That VMS looks quite familiar lol 8) ;D +T

I'm going to get Robb aka DarkTrain to make me some straight BNC>Right-Angle Stubby XLR's for my VMS>70d setup, so thanks for the ideas everyone :) 8) I already have Gold Radio Shack BNC>RCA adapters, and then Straight & Rt-Angle RCA>Rt-Angle Stubby XLR's, but Id prefer the locking connectors of the BNC>XLR, so both ends are locked into place!
« Last Edit: March 29, 2016, 11:51:16 AM by F.O.Bean »
Schoeps MK4's | MK41's ->
Schoeps | NBob 250/05 KCY's ->
Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's ->
DarkTrain Right Angle Stubby | GakCable XLR's ->
Sound Devices MixPre-6 | Tascam DR-70D ->
128gb | 64gb SanDisk Extreme Pro SDXC-I

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline caymanreview

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 9765
  • Gender: Male
    • shows ive taped  that are in circulation
Re: bnc connectors for VMS
« Reply #6 on: March 29, 2016, 11:23:28 AM »
The F8 is line in on 1/4", mic in on xlr.

Offline F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (121)
  • Needs to get out more...
  • *****
  • Posts: 40577
  • Gender: Male
  • Taperus Maximus
Re: bnc connectors for VMS
« Reply #7 on: March 29, 2016, 11:49:09 AM »
The F8 is line in on 1/4", mic in on xlr.

Really? Are you 100% positive about that? I could've sworn Tonedeaf used XLR Ins with his VMS/PSP3/etc ???
Schoeps MK4's | MK41's ->
Schoeps | NBob 250/05 KCY's ->
Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's ->
DarkTrain Right Angle Stubby | GakCable XLR's ->
Sound Devices MixPre-6 | Tascam DR-70D ->
128gb | 64gb SanDisk Extreme Pro SDXC-I

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline caymanreview

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 9765
  • Gender: Male
    • shows ive taped  that are in circulation
Re: bnc connectors for VMS
« Reply #8 on: March 29, 2016, 11:51:42 AM »
Yea im sure. Steve is the only one running it like that i think.

Offline F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (121)
  • Needs to get out more...
  • *****
  • Posts: 40577
  • Gender: Male
  • Taperus Maximus
Re: bnc connectors for VMS
« Reply #9 on: March 29, 2016, 12:32:39 PM »
Yea im sure. Steve is the only one running it like that i think.

So Steve is definitely running Preamp>XLR>F8 ??? I thought that's what Ive been seeing 8)

I'm going to look through the manual real quick, but I believe you Dustin ;) Just odd that Zoom would do that?

EDIT: Yea, just saw the manual. I knew you were right Dustin, however, I wanted to see if they explained why? Doesn't seem to mention why after looking through! All I can say is that's strange that the line inputs are supposed to be on 1/4" inputs only ??? Wonder what is wrong with using the XLR's? 1/4" just have a higher input? Probably easier to clip the XLR inputs since their meant for a mic signal and not a line signal!
« Last Edit: March 29, 2016, 12:49:16 PM by F.O.Bean »
Schoeps MK4's | MK41's ->
Schoeps | NBob 250/05 KCY's ->
Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's ->
DarkTrain Right Angle Stubby | GakCable XLR's ->
Sound Devices MixPre-6 | Tascam DR-70D ->
128gb | 64gb SanDisk Extreme Pro SDXC-I

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline caymanreview

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 9765
  • Gender: Male
    • shows ive taped  that are in circulation
Re: bnc connectors for VMS
« Reply #10 on: March 29, 2016, 12:45:29 PM »
I wish i was knowledgeable enough about the f8 to answer those ?'s

I was skeptical about using 1/4" inputs. I like to run different outboard pres. But the chopped right angle 1/4" cables Ted made me cured that. Rock solid in my bag!

Offline F.O.Bean

  • Is a 4 channel slut and
  • Trade Count: (121)
  • Needs to get out more...
  • *****
  • Posts: 40577
  • Gender: Male
  • Taperus Maximus
Re: bnc connectors for VMS
« Reply #11 on: March 29, 2016, 01:48:58 PM »
I wish i was knowledgeable enough about the f8 to answer those ?'s

I was skeptical about using 1/4" inputs. I like to run different outboard pres. But the chopped right angle 1/4" cables Ted made me cured that. Rock solid in my bag!

I wouldn't have a problem running the 1/4" plugs either. It is what it is! Just wondered if they mentioned why? But the line in is probably close to 50db hotter than the mic IN, at least that's how Sonosax setup their MIC/LINE inputs! Something like a 50db hotter/lower signal! If you have a SUPER hot preamp, it might brickwall the F8 XLR inputs? But the VMS is the hottest preamp Ive run, so if Steve is running VMS/PSP3/etc>XLR>F8, the XLR input can handle a pretty hot signal and you should have a hard time clipping it like that, if its even possible?

Thanks for the heads up though, Dustin! I had never known that about the F8 until reading your post this morning!
Schoeps MK4's | MK41's ->
Schoeps | NBob 250/05 KCY's ->
Schoeps VMS 02IB | Naiant +60v/Low Noise PFA's ->
DarkTrain Right Angle Stubby | GakCable XLR's ->
Sound Devices MixPre-6 | Tascam DR-70D ->
128gb | 64gb SanDisk Extreme Pro SDXC-I

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline tgakidis

  • Trade Count: (520)
  • Needs to get out more...
  • *****
  • Posts: 5554
  • Gender: Male
    • My Recordings on the Archive:
Re: bnc connectors for VMS
« Reply #12 on: March 29, 2016, 04:11:49 PM »
I wish i was knowledgeable enough about the f8 to answer those ?'s

I was skeptical about using 1/4" inputs. I like to run different outboard pres. But the chopped right angle 1/4" cables Ted made me cured that. Rock solid in my bag!

F8 Jacks
XLR = Mic Level Input
1/4" = Line Level Input
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Telefunken R-F-T AR-51 / Telefunken ELA M 260 (m962b,tk60,tk61,tk62) / Telefunken SM2C / Telefunken M60 / AKG c426b / AKG c414-xls / AKG c460b (ck61,ck62,ck63,ck69,a60,ck1,ck22,ck3,ck8) / Nbob AKG Actives/Nbox Platinum / Naiant AKG Couplings/PFA / Blue B6 Capsules / AT853 w/ 4.7k Mod (U873R,Card,Omni,Sub)
Pre-Amps: Sonosax SX-M2 / Lunatec V3
Recs: Sound Devices MixPre-10T / Sound Devices MixPre-6 / Zoom F8 / Edirol R-44 / Tascam DR-680 / Sony PCM-M10

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-date

Offline yug du nord

  • uncleyug>Snowman>
  • Trade Count: (53)
  • Needs to get out more...
  • *****
  • Posts: 4958
  • made with natural flavor
Re: bnc connectors for VMS
« Reply #13 on: March 29, 2016, 06:48:23 PM »
^Off topic: 
Sound Devices USBpre2 is the same.   
XLR = MIC
1/4" = LINE
RCA = LINE
.....got a blank space where my mind should be.....

Offline schoepsnbox

  • Trade Count: (37)
  • Taperssection Member
  • ***
  • Posts: 422
  • Gender: Male
  • Nbox...........Zero's and One's
Re: bnc connectors for VMS
« Reply #14 on: March 30, 2016, 10:04:14 PM »
Same goes for the Korg MR-1000

 

RSS | Mobile
Page created in 0.246 seconds with 38 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company