Become a Site Supporter and Never see Ads again!

Author Topic: AT853s to R09hr or Tascam D40 setup help  (Read 565 times)

0 Members and 1 Guest are viewing this topic.

Offline Jerseyboy

  • Trade Count: (5)
  • Taperssection Regular
  • **
  • Posts: 75
AT853s to R09hr or Tascam D40 setup help
« on: December 31, 2016, 12:22:24 PM »
I'm seeking the correct setup/connection for my AT853s when going into an Edirol r09hr & Tascam D40.  I have a general idea, but I'd rather get experienced instructions when using these mics.  I have the adapter cables for each input.

Thanks in advance!

jb

Offline larrysellers

  • Trade Count: (31)
  • Taperssection All-Star
  • ****
  • Posts: 1791
  • Gender: Male
  • Qualified
Re: AT853s to R09hr or Tascam D40 setup help
« Reply #1 on: December 31, 2016, 12:48:24 PM »
I am guessing you want a set up like this:



Contact ted and he can most likely make yer mics look just like these ---> taperssection.com/index.php?topic=171728.msg2127159#msg2127159 or give you whatever instruction you require to do it yerself.
****master of the soft clap****

Offline Jerseyboy

  • Trade Count: (5)
  • Taperssection Regular
  • **
  • Posts: 75
Re: AT853s to R09hr or Tascam D40 setup help
« Reply #2 on: December 31, 2016, 01:23:45 PM »
I have everything pictured with the exception of the mic stand cradles.  I need detailed hook up info.  Such as do I use 48v phantom power on the d40, pip on the r09hr etc.  Can these mics run straight in without a pre-amp?

Thanks for your reply.

jb

also iso- at853 hyper & Omni caps

Offline Falconidave

  • Trade Count: (25)
  • Taperssection Member
  • ***
  • Posts: 332
  • Gender: Male
  • "I went to too many concerts" said no one ever!
Re: AT853s to R09hr or Tascam D40 setup help
« Reply #3 on: March 13, 2017, 01:16:18 PM »
They will run either way, mic-in depending on what voltage your deck provides. I run mine almost always with the phantom adapters(providing I can get them in the venue), and Naiant TinyBox. They can really handle high SPL's with p48 phantom power.
Mics: AT853(3-wire)(sc,c,h,o); AT943(3-wire)(c,h,o); Audix M1290 (h); AT933(3-wire)(c,h,o); AT831(3-wire)(c); Shure 185(c); Sony ECM-166BMP (o); CA-14(c); CA-11(c,o)
Preamps:  Naiant Tinybox v2.3; CA 9200(3-wire); CA-Ugly II
Recorders: Sony PCM-D50; Sony PCM-M10; Edirol R-09HR; Sony MZ-RH1
Video:  Panasonic HDC-TM700 HD; Canon PowerShot SX50 HD; Sony DSC-HX50V

 

RSS | Mobile
Page created in 0.09 seconds with 26 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company