Become a Site Supporter and Never see Ads again!

Author Topic: The Art of the Matrix  (Read 722 times)

0 Members and 1 Guest are viewing this topic.

Offline bdasilva

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1353
  • Gender: Male
  • Use to be a Fishhead
The Art of the Matrix
« on: February 17, 2017, 02:34:52 PM »
It is always such a hassle to ask a soundguy you don't know to "borrow" two lines to get your mics from the stage to the soundboard... Or having to ask him/her to send the FoH signal to the stage for you...   Do you think this system might work?  You could place the omni mics where you need them...    or I use cad E300S  that have built in phantom power...  I think this would work  (two sets of course)  all this is taken from the ENG/Film bunch that come along with owning a F8?

this system can be had for 110$ (tomtom)
« Last Edit: February 17, 2017, 03:42:29 PM by bdasilva »
Cad E300S set.. AT822  AKG C 414 B-XLS/ST  
Dorsey-Mod MK-012 w/ O, C, H and RED L/D Caps
Superlux S502 ORTF   LSD2
Silverpath  Cables> 
Tascam DR-680MKii    DR- 680 (X2)   Tascam DR-40     Sound Devices USBPre    SONY  PMD-M10   Zoom F8

"Buy a Taper a Drink... Prime the Pumps of live Music"

               On the "music" side of the "Music Business"

Offline jcable77

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 386
  • Gender: Male
  • Needs to stay in more
Re: The Art of the Matrix
« Reply #1 on: February 28, 2017, 02:16:46 AM »
If you have the dr-40 why not just leave that at the board separate of your rig? That's what I've been doing lately. All comes together in post.
Mics- Telefunken M60’s tk60,61,62 AKG 460's/480's)ck61’s,63’s akg active  couplings>naiant pfa's, naiant x-r's (cards,omnis). Pre- SD-302, naiant x-y amp, apogee mini-me X2, Lunatech V-3, Decks- R-44, dr-40,dr100mk3


RSS | Mobile
Page created in 0.085 seconds with 24 queries.
© 2002-2018
Powered by SMF