Become a Site Supporter and Never see Ads again!

Author Topic: M 248 w external battery  (Read 972 times)

0 Members and 1 Guest are viewing this topic.

Offline ccage

  • Trade Count: (16)
  • Taperssection Member
  • ***
  • Posts: 509
  • Gender: Male
M 248 w external battery
« on: May 04, 2017, 09:57:00 PM »
Doug Oade fixed me up w/ a 12v external to test on my old 248.
Will test it out soon and report back

Schoeps  MK4, Microtech Gefell 210, NBob Actives, JB Mod PFA Nak 300>cp103, JB Mod PFA Nak cp104   
Oade m248 Pre x2, Oade m148 Pre, Audioroot Femto Pre
SD 744
Darktrain cables-tgakidis cables/bar
followinbob clips/risers/bars

Offline Colin Liston

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 2157
  • Gender: Male
Re: M 248 w external battery
« Reply #1 on: May 06, 2017, 10:31:49 AM »
I am very interested to see how this works out.  Does the 12v by-pass the internal batteries?
Occasionally....music mics record

Offline ccage

  • Trade Count: (16)
  • Taperssection Member
  • ***
  • Posts: 509
  • Gender: Male
Re: M 248 w external battery
« Reply #2 on: May 07, 2017, 07:53:56 PM »
I am very interested to see how this works out.  Does the 12v by-pass the internal batteries?

Here's response from Doug on Battery set up:

Hi Chris, no worries, I'm not in any hurry. Yes, the way it is wired, it's either
the internal battery or the external battery. If they both worked together then
there would have to be a circuit that protects the batteries from each other. That
uses power and reduces runtime. If you have a weak internal then plug in an external
with no circuit protection, it will blow a fuse or, over time, cause both batteries
to swell and fail.
 
Schoeps  MK4, Microtech Gefell 210, NBob Actives, JB Mod PFA Nak 300>cp103, JB Mod PFA Nak cp104   
Oade m248 Pre x2, Oade m148 Pre, Audioroot Femto Pre
SD 744
Darktrain cables-tgakidis cables/bar
followinbob clips/risers/bars

Offline tubems

  • Trade Count: (10)
  • Taperssection Regular
  • **
  • Posts: 134
  • local idiot
Re: M 248 w external battery
« Reply #3 on: May 16, 2017, 08:06:49 PM »
i need this for the 148, but well, i think people have tried this before
------------
local idiot

Offline fsulloway

  • Trade Count: (18)
  • Taperssection All-Star
  • ****
  • Posts: 1650
  • Gender: Male
Re: M 248 w external battery
« Reply #4 on: May 17, 2017, 02:43:45 PM »
That would be nice but I don't there is a solution for it right now. At least I don't think Doug is interested in working on one. Chris may chime in on that perhaps.
schoeps ccm4's
AKG ck62, ck63, ck61
Nbob/pfa, Naiant/pfa
CAFS, CA Ugly
oade m148, V3
DR680, M10

"Wilmington, North Carolina....Let us hear your motherf***in' pride!" Patterson Hood 12-09-04

"Just About Unwound From Chasing Down The Sound"

Offline ccage

  • Trade Count: (16)
  • Taperssection Member
  • ***
  • Posts: 509
  • Gender: Male
Re: M 248 w external battery
« Reply #5 on: May 23, 2017, 06:54:35 PM »
took the combo out for a spin for NMA last Saturday...ran the ext battery for 3 1/2 hrs and it showed 75% charge left.
Ran the mk4's w/ gain knobs on pre at about 60%...sounds great as usual.
Will see if the drain rate increases more or holds steady with what's left on external. 
Schoeps  MK4, Microtech Gefell 210, NBob Actives, JB Mod PFA Nak 300>cp103, JB Mod PFA Nak cp104   
Oade m248 Pre x2, Oade m148 Pre, Audioroot Femto Pre
SD 744
Darktrain cables-tgakidis cables/bar
followinbob clips/risers/bars

Offline goodcooker

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 2104
  • Gender: Male
  • goes to 11
Re: M 248 w external battery
« Reply #6 on: May 24, 2017, 02:13:05 PM »
i need this for the 148, but well, i think people have tried this before

The 148 has 48 volts of internal batteries and no DC - DC converter. You would need to hook it up to a 48 volt external battery.
AKG CK1x > tinybox > DR60d
JBmod Nak300 > battbox > MR1

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City

"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline Colin Liston

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 2157
  • Gender: Male
Re: M 248 w external battery
« Reply #7 on: May 24, 2017, 08:42:28 PM »
i need this for the 148, but well, i think people have tried this before

The 148 has 48 volts of internal batteries and no DC - DC converter. You would need to hook it up to a 48 volt external battery.

I'm convinced Doug built the 148 around a 48 volt power supply he had lying around
Occasionally....music mics record

Offline ccage

  • Trade Count: (16)
  • Taperssection Member
  • ***
  • Posts: 509
  • Gender: Male
Re: M 248 w external battery
« Reply #8 on: June 08, 2017, 01:40:14 PM »
Doug is looking at external option for my 148 I sent him.
Will keep folks posted.
Schoeps  MK4, Microtech Gefell 210, NBob Actives, JB Mod PFA Nak 300>cp103, JB Mod PFA Nak cp104   
Oade m248 Pre x2, Oade m148 Pre, Audioroot Femto Pre
SD 744
Darktrain cables-tgakidis cables/bar
followinbob clips/risers/bars

Offline tubems

  • Trade Count: (10)
  • Taperssection Regular
  • **
  • Posts: 134
  • local idiot
Re: M 248 w external battery
« Reply #9 on: June 08, 2017, 03:03:21 PM »
Doug is looking at external option for my 148 I sent him.
Will keep folks posted.

cool.  my internals are dead on mine and ill wait on this till i replace them.
------------
local idiot

Offline Colin Liston

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 2157
  • Gender: Male
Re: M 248 w external battery
« Reply #10 on: June 08, 2017, 06:17:54 PM »
Doug is looking at external option for my 148 I sent him.
Will keep folks posted.

Hell yes.  I can't wait to see what he comes up with.  An external option or a locking on/off switch.
Occasionally....music mics record

 

RSS | Mobile
Page created in 0.108 seconds with 33 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company