Become a Site Supporter and Never see Ads again!

Author Topic: Aeta PSP>M10 -- what output?  (Read 192 times)

0 Members and 1 Guest are viewing this topic.

Offline acidjack

  • Site Supporter
  • Trade Count: (35)
  • Needs to get out more...
  • *
  • Posts: 5728
  • Gender: Male
Aeta PSP>M10 -- what output?
« on: June 05, 2017, 02:05:41 PM »
When connecting a PSP2 or PSP3 to an M10, do most people here used a 2xXLR>mini cable, or are people comfortable using the miniplug>miniplug, even though that PSP output is a headphone out? My bias is toward the former, but...
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061, Naiant X-X, AT 853c, shotgun
Installed: AT 4051
Pres/Power: Aeta PSP3, tinybox v2  [KCY], CA-UBB
Decks: Zoom F8, R-26, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Online jbell

  • TDS
  • Trade Count: (129)
  • Needs to get out more...
  • *****
  • Posts: 3798
  • Gender: Male
  • Spreadicated
Re: Aeta PSP>M10 -- what output?
« Reply #1 on: June 05, 2017, 04:26:55 PM »
I prefer XLR >1/8!  I always ran that way with the PSP3 and PSP2. 
« Last Edit: June 05, 2017, 06:20:26 PM by jbell »
Schoeps MK4's, MK41's> KCY 250/5 Ig> Schoeps VMS 5U> Sound Devices Mixpre-6, Sony PCM-M10

Offline yug du nord

  • uncleyug>Snowman>
  • Trade Count: (53)
  • Needs to get out more...
  • *****
  • Posts: 4874
  • made with natural flavor
Re: Aeta PSP>M10 -- what output?
« Reply #2 on: June 05, 2017, 05:16:57 PM »
I've had great results with PSP3 running mini>mini>M10. 
And I usually run mini>mini>M10 as a backup rig when I use the XLR's for my "big rig".
I have no worries with the 1/8" output of the PSP3.  But....  YMMV.
.....got a blank space where my mind should be.....

Offline tedyun

  • Trade Count: (26)
  • Taperssection Member
  • ***
  • Posts: 396
Re: Aeta PSP>M10 -- what output?
« Reply #3 on: June 05, 2017, 05:34:40 PM »
I've done exactly as Guy described with my PSP2. I have used this in the past as a backup to my big rig and hadn't noticed any major differences in sound. Just for personal preference, I would go XLR > mini, but if the situation demanded it, I would go mini>mini with no worries.

I've had great results with PSP3 running mini>mini>M10. 
And I usually run mini>mini>M10 as a backup rig when I use the XLR's for my "big rig".
I have no worries with the 1/8" output of the PSP3.  But....  YMMV.
Mics: B&K 4011, Schoeps MK5 (Nbobs, Naiant PFA), Busman BSC-1 (K11/K21/K31/K41 caps), Church CA-14 (o, c), Church CAFS, Core Sound Binaurals
Pre: EAA PSP-2,  Lunatec V3, Nbox-Platinum, Church CA-9200
ADC: Mytek 192 ADC, Oade Mod SBM-1
Rec: Oade Supermod PMD-661, Tascam DR60D, M-Audio MicroTrack II, Korg MR-1 (32GB SSD mod); Sony PCM-M10, Edirol R09HR; iRiver HP-120
Photo: Canon 5D3, Canon EF-S 17-55mm f2.8, Canon EF 35mm f1.4L Canon EF 24-70 f2.8L MkI, Canon EF 70-200mm f2.8L IS MkI, Canon EF 50 mm f1.4, Canon EF 50 f1.2L, Canon EF 300 f/4L IS, Canon EF 100-400 f4-5.6L IS MkI
Video: Canon HF100

 

RSS | Mobile
Page created in 0.105 seconds with 26 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company