Become a Site Supporter and Never see Ads again!

Author Topic: MD > h120 ?  (Read 5314 times)

0 Members and 1 Guest are viewing this topic.

Offline 612

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 8183
  • Minneapolis, MN
MD > h120 ?
« on: April 18, 2009, 01:38:22 PM »
I was going to go through a friend's minidisc stash and transfer some things.

I think I remember hearing about people doing DAT > NBJ3 or Vinyl > etc. but would taking the digital out on a MD deck (a model that has one) into the digi-in on a h120 produce a good transfer? I want to try and stay away from using the Line-In on the h120 but if that's the last resort does that method work out pretty decent?

Last I knew he had a couple of different MD decks and a standalone MD > CDR burner that would likely have some sort of digi-out.

TIA.

John
Empty's Tapes & My recordings on the LMA

"Keep active, stay positive..." - a wise man

Offline boojum

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3629
  • Gender: Male
Re: MD > h120 ?
« Reply #1 on: April 18, 2009, 02:34:44 PM »
Digital out from a deck with it is a way to do it which is very good.  The best is to kiss up to someone with an RH1.  This MD player can xfer any non-DRM MD as an upload, even legacy.  The xfer is done digitally and way faster than real-time, and that's what is sweet: it is so much faster.

Minidisco.org is where the MD heads hang out.  Try there.

How many MD's are you talking about?
Nov schmoz kapop.

Offline yug du nord

  • ...til things never seen seem familiar…
  • Trade Count: (56)
  • Needs to get out more...
  • *****
  • Posts: 5533
  • made with natural flavor
Re: MD > h120 ?
« Reply #2 on: April 18, 2009, 04:09:50 PM »
empty...  let me know if you need any help regarding MD stuff....  I'm pretty familiar with it all....
.....got a blank space where my mind should be.....

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: MD > h120 ?
« Reply #3 on: April 19, 2009, 04:49:24 AM »
Digital out from a deck with it is a way to do it which is very good.  The best is to kiss up to someone with an RH1.  This MD player can xfer any non-DRM MD as an upload, even legacy.  The xfer is done digitally and way faster than real-time, and that's what is sweet: it is so much faster.

Minidisco.org is where the MD heads hang out.  Try there.

How many MD's are you talking about?

Another option as a fall back is using a stand-alone MD player with optical out as you noted. I picked up a Sony MDS-JE500 off of ebay for ~$50 so I could transfer all of my old junk off of MD. I figured once I was done, I could either sell it or junk it for as little as I've put in. Check over at minidisco to see what models have optical out, then hunt around on ebay. If I remember correctly, there seem to be 3 or 4 that are somewhat cheap and frequent the bay.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline mikesalvo

  • Trade Count: (51)
  • Taperssection All-Star
  • ****
  • Posts: 1835
  • Gender: Male
  • get your Avett on!!!
Re: MD > h120 ?
« Reply #4 on: April 19, 2009, 12:10:55 PM »
I recently transferedd a bunch of MD's, and I just went Analog out of the MD>Ua-5>iriver. I liked it better than a MD>iRiver transfer cause it gave easier control over the L and R channels.
AKG se300b (ck/91, ck/93) > Busman T-Mod R-4

Offline 612

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 8183
  • Minneapolis, MN
Re: MD > h120 ?
« Reply #5 on: April 19, 2009, 03:50:45 PM »
Thanks for the replies everyone. They're appreciated.

Turns out he has a Sony MDS-JE470 which only has RCA outs unfortunately. I think he has a Sony MZ-R91 (he mistakenly called it a MR-91?) which also only has line-out. He also has a Sony MR-55 but I cannot find any info on it's outputs. I believe it's the older of the two portable decks so I'm sure there's no optical out on that deck either.

I think it's analog transfers unless someone else had a MD deck w/ optical out locally.  :-\
Empty's Tapes & My recordings on the LMA

"Keep active, stay positive..." - a wise man

Offline bonzo71

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 34
Re: MD > h120 ?
« Reply #6 on: April 19, 2009, 04:25:02 PM »
Here is a link to all md equipment..you can use it to tell if it has digi out..most don't.  I know an mz-hr1 can do it direct to a PC, but I recall discussion about it not being the same..something about an additional level of atrac encoding and the end result being different than a digi out transfer.   

http://www.minidisc.org/equipment_browser.html

Offline dunebug81

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2045
  • Gender: Male
Re: MD > h120 ?
« Reply #7 on: April 19, 2009, 04:33:27 PM »
I've got an RH1 is you need some digital transfers done. 
Greg
www.enemyzero.com/greg/
aim: dunebug81

Offline EYES

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 255
  • Gender: Male
Re: MD > h120 ?
« Reply #8 on: April 19, 2009, 10:19:17 PM »
like to pull out old md recorded for my ca mics>ca9100>md for low profile set up, ? is will this work using line in. thanks
ADK sc-t, ca-11 cards, omni.                                                   
 ua-5, ca-9100
pmd660, mt,
ALWAYS GRATEFUL,EYES

nameloc01

  • Guest
  • Trade Count: (0)
Re: MD > h120 ?
« Reply #9 on: April 19, 2009, 10:50:48 PM »
Yup.

Offline EYES

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 255
  • Gender: Male
Re: MD > h120 ?
« Reply #10 on: April 20, 2009, 12:29:51 PM »
great looks like my best way to go, thanks for reassurance. always greatful eyes
ADK sc-t, ca-11 cards, omni.                                                   
 ua-5, ca-9100
pmd660, mt,
ALWAYS GRATEFUL,EYES

Offline 612

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 8183
  • Minneapolis, MN
Re: MD > h120 ?
« Reply #11 on: April 29, 2009, 02:37:22 PM »
Digital out from a deck with it is a way to do it which is very good.  The best is to kiss up to someone with an RH1.  This MD player can xfer any non-DRM MD as an upload, even legacy.  The xfer is done digitally and way faster than real-time, and that's what is sweet: it is so much faster.

Minidisco.org is where the MD heads hang out.  Try there.

How many MD's are you talking about?

Another option as a fall back is using a stand-alone MD player with optical out as you noted. I picked up a Sony MDS-JE500 off of ebay for ~$50 so I could transfer all of my old junk off of MD. I figured once I was done, I could either sell it or junk it for as little as I've put in. Check over at minidisco to see what models have optical out, then hunt around on ebay. If I remember correctly, there seem to be 3 or 4 that are somewhat cheap and frequent the bay.

There is a Sony MDS-JE500 on ebay for $1.25 with 2 bids and 9 days to go. Hmm...

But I've been talking with a friend locally and it sounds like I'm going to borrow his Sony MDS-JE520. Woot. I was wondering, when transfering digitally with these units in real time where does the Rec Level come in? Perhaps just leave that at 0 and add gain in post if need be? I just want to get the cleanest possible transfer. I do plan on downloading the user manual.
Empty's Tapes & My recordings on the LMA

"Keep active, stay positive..." - a wise man

Offline dunebug81

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2045
  • Gender: Male
Re: MD > h120 ?
« Reply #12 on: April 29, 2009, 02:49:04 PM »
Digital out from a deck with it is a way to do it which is very good.  The best is to kiss up to someone with an RH1.  This MD player can xfer any non-DRM MD as an upload, even legacy.  The xfer is done digitally and way faster than real-time, and that's what is sweet: it is so much faster.

Minidisco.org is where the MD heads hang out.  Try there.

How many MD's are you talking about?

Another option as a fall back is using a stand-alone MD player with optical out as you noted. I picked up a Sony MDS-JE500 off of ebay for ~$50 so I could transfer all of my old junk off of MD. I figured once I was done, I could either sell it or junk it for as little as I've put in. Check over at minidisco to see what models have optical out, then hunt around on ebay. If I remember correctly, there seem to be 3 or 4 that are somewhat cheap and frequent the bay.

There is a Sony MDS-JE500 on ebay for $1.25 with 2 bids and 9 days to go. Hmm...

But I've been talking with a friend locally and it sounds like I'm going to borrow his Sony MDS-JE520. Woot. I was wondering, when transfering digitally with these units in real time where does the Rec Level come in? Perhaps just leave that at 0 and add gain in post if need be? I just want to get the cleanest possible transfer. I do plan on downloading the user manual.

if anyone is looking for a stand alone deck w/ optical out I'll sell mine for $50 delivered.  I have the JE510 (i think, i can double check if you're really intersted)...I know it has optical out because thats the main reason I bought it.  It works/plays discs fine but won't read HIMD or NetMD formats (just SP/LP).  Since I've got my RH1 I have no need for the deck and it sits in my closet collecting dust. 
Greg
www.enemyzero.com/greg/
aim: dunebug81

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: MD > h120 ?
« Reply #13 on: April 29, 2009, 09:15:24 PM »
There is a Sony MDS-JE500 on ebay for $1.25 with 2 bids and 9 days to go. Hmm...

But I've been talking with a friend locally and it sounds like I'm going to borrow his Sony MDS-JE520. Woot. I was wondering, when transfering digitally with these units in real time where does the Rec Level come in? Perhaps just leave that at 0 and add gain in post if need be? I just want to get the cleanest possible transfer. I do plan on downloading the user manual.

I think I paid like $40 for mine on ebay about 12 months ago.

If your transfering digitally, I'm trying to remember if you get *real* gain controls as opposed to just a setting which isn't active on the H120s (rockbox'ed that is). Either way, just fiddle with the gain in post.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline 612

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 8183
  • Minneapolis, MN
Re: MD > h120 ?
« Reply #14 on: April 29, 2009, 11:57:49 PM »
Thank you.
Empty's Tapes & My recordings on the LMA

"Keep active, stay positive..." - a wise man

 

RSS | Mobile
Page created in 0.076 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF