Become a Site Supporter and Never see Ads again!

Author Topic: Powerrunner adapter for PS-2/AD-20...?  (Read 1888 times)

0 Members and 1 Guest are viewing this topic.

Offline macroint

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4373
  • Gender: Male
    • Jeff's List
Powerrunner adapter for PS-2/AD-20...?
« on: January 02, 2007, 09:02:18 AM »
I'm always worried about power issues with the AD-20, so I'd like to try and use the PowerRunner for both the AD-20 and PS-2...does anyone know what retail stores might carry the appropriate plug?

Thanks!
Peluso CEMC6>PS-2>AD-20>NJB3


SUPPORT LOCAL MUSIC
http://baltimore-taper.blogspot.com

stirinthesauce

  • Guest
  • Trade Count: (0)
Re: Powerrunner adapter for PS-2/AD-20...?
« Reply #1 on: January 07, 2007, 10:57:12 AM »
I'm always worried about power issues with the AD-20, so I'd like to try and use the PowerRunner for both the AD-20 and PS-2...does anyone know what retail stores might carry the appropriate plug?

Thanks!

pm Halleyscomet8 (Dave)

He runs the exact same setup and uses powerrunners.

Offline halleyscomet8

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 5557
  • Gender: Male
Re: Powerrunner adapter for PS-2/AD-20...?
« Reply #2 on: January 07, 2007, 11:08:39 AM »
check this thread http://taperssection.com/index.php/topic,70568.msg945915.html#msg945915

i use two power runners, one for each unit. the adaptaplug is available at radio shack and looks like a mini 1/8 plug. make sure the plug is always plugged into the unit before the power source. i hear it can do bad things to the ad20. also there was talk of there being some sort of noise created when running both units off of one battery.
my shows on the archive: http://www.archive.org/bookmarks/halleyscomet8
And, yes, I know I suck about getting stuff circulated.  ;)

 

RSS | Mobile
Page created in 0.036 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF