Become a Site Supporter and Never see Ads again!

Author Topic: Eco Charge EC-90 schematic  (Read 2585 times)

0 Members and 1 Guest are viewing this topic.

Offline wheat667

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
Eco Charge EC-90 schematic
« on: October 02, 2011, 10:53:13 PM »
Does anyone know where I could find a schematic for the circuitry under the cap for the EC-90 battery?  There's no response from the Eco Charge website.

thanks

Offline hi and lo

  • Trade Count: (38)
  • Needs to get out more...
  • *****
  • Posts: 2294
Re: Eco Charge EC-90 schematic
« Reply #1 on: October 03, 2011, 10:38:37 AM »
Not a schematic, but you might want to check out this thread if you're looking to replace a dead batt.

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: Eco Charge EC-90 schematic
« Reply #2 on: October 03, 2011, 11:47:49 AM »
Have you tried drawing it out yourself?  I wouldn't think it's too complex of a circuit and is probably only a two layer board (top and bottom).  Are the components marked?
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline wheat667

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
Re: Eco Charge EC-90 schematic
« Reply #3 on: October 03, 2011, 07:34:18 PM »
I already replaced the battery a few months ago and it worked fine for about 5 times.  Then suddenly, I get no power on either the 7.5V nor the 12v sides.   Seems to charge ok and the battery is not the problem (I'm told).   My electric guy found some old electric component to replace on the board, but he's not optimistic.  So he was wondering if he could get a schematic.  Sadly, I'm not skilled in this area.

thanks for the replies.

 

RSS | Mobile
Page created in 0.06 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF