Become a Site Supporter and Never see Ads again!

Author Topic: MK4v lemo collette mounts  (Read 5441 times)

0 Members and 1 Guest are viewing this topic.

Offline waltmon

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2043
  • Gender: Male
MK4v lemo collette mounts
« on: March 30, 2016, 11:45:26 AM »
Can anyone post a pic or 2 of their mounts when running mk4v's with the Collette cables?

Thanks.
KM140's, KM150's, U89's, Mixpre-10T II, 788T, F3

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped  that are in circulation
Re: MK4v lemo collette mounts
« Reply #1 on: March 30, 2016, 12:54:32 PM »
Nbob or schoeps colletes?

Offline waltmon

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2043
  • Gender: Male
Re: MK4v lemo collette mounts
« Reply #2 on: March 30, 2016, 02:03:20 PM »
They would be the schoeps collettes - I was looking at a pair that were set up for a lemosax - I was sure there were better ways to mount them than the set I saw pics of


Thanks
KM140's, KM150's, U89's, Mixpre-10T II, 788T, F3

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline Jhurlbs81

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 3076
  • Gender: Male
    • My LMA collection
Re: MK4v lemo collette mounts
« Reply #3 on: March 30, 2016, 02:12:31 PM »
I use following bob's sgc-style clips to vertically mount my mk4vs
FREE JERRYFREAK!

Offline kingkita

  • Trade Count: (50)
  • Taperssection Member
  • ***
  • Posts: 432
Re: MK4v lemo collette mounts
« Reply #4 on: March 30, 2016, 03:50:54 PM »

Offline gormenghast

  • Trade Count: (44)
  • Taperssection Member
  • ***
  • Posts: 833
  • Gender: Male
Re: MK4v lemo collette mounts
« Reply #5 on: March 30, 2016, 04:17:59 PM »
http://taperssection.com/index.php?topic=161593.0

Hit him up Walt

I have other's but I'm not sure where those pics are.



A lot of people run a race to see who is the fastest. I run to see who has the most guts, who can punish himself into exhausting pace, and then at the end, punish himself even more.

Offline waltmon

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2043
  • Gender: Male
Re: MK4v lemo collette mounts
« Reply #6 on: March 31, 2016, 12:16:02 PM »
Is there much sonic difference in the 4V?   Ive always like the 4V and 41V recording the best of the schoeps pulls.
KM140's, KM150's, U89's, Mixpre-10T II, 788T, F3

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline Jhurlbs81

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 3076
  • Gender: Male
    • My LMA collection
Re: MK4v lemo collette mounts
« Reply #7 on: March 31, 2016, 12:26:53 PM »
The 4V has a slight high-end emphasis around 10k.  The 41v does not have this emphasis from what I understand.
FREE JERRYFREAK!

Offline waltmon

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2043
  • Gender: Male
Re: MK4v lemo collette mounts
« Reply #8 on: March 31, 2016, 12:53:48 PM »
I think the boost is really a plus especially in boomier room recordings I've heard Appreciate the input.

  Been drowning myself in sound samples lately doing comparisons. Comparing schoeps mk4s versus 4vs as well as Neumann LD vs SD comps.

  One mic I am super impressed with is the Neumann KM185 - there are excellent examples on archive.  I read some pretty interesting comparisons between them and 641's.
KM140's, KM150's, U89's, Mixpre-10T II, 788T, F3

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline waltmon

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2043
  • Gender: Male
Re: MK4v lemo collette mounts
« Reply #9 on: March 31, 2016, 01:40:44 PM »
Is there an adaptor to go from the Collette lemo connector to XLR...if you wanted to use a different pre or maybe go directly to the 744T for example?
KM140's, KM150's, U89's, Mixpre-10T II, 788T, F3

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4567
  • Gender: Male
  • Spreadicated
Re: MK4v lemo collette mounts
« Reply #10 on: March 31, 2016, 01:47:53 PM »
The boost only happens in the 4v's!  The 41v's have the same sound as 41's they are just vertical caps.  You could get a set of Nbob actives with PFA's or a Schoeps KCY cable and PFA to run into any pre or recorder.   I have a set of Nbob cables I might consider selling if you are interested. 
« Last Edit: March 31, 2016, 01:49:53 PM by jbell »
Mics: DPA ST4011ER & 4018ER
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline perks

  • Trade Count: (31)
  • Needs to get out more...
  • *****
  • Posts: 5171
    • Recordings uploaded to TTD
Re: MK4v lemo collette mounts
« Reply #11 on: March 31, 2016, 01:52:48 PM »
Mk's 5 also have a top end lift when run as cardioids but I believe its different than the mk4v's.
Mics: Schoeps MK5's, Schoeps MK41's, AT853's (C,SC,H,O), DPA 4061's
Preamps/converters: Schoeps VMS52UB (x2), Nbox (x2), E.A.A. PSP-2 (x2) Grace Lunatec V2, Sound Devices MP-2, DPA MMA6000, Naiant Tinybox v1.5, Naiant PiPsqueak, Church Ugly, Apogee Mini-Me, Benchmark AD2k+
Recorders: Tascam DR-680, Korg MR-1, Edirol R-05, Sony PCM-M10 (x2), Tascam DR-07, Marantz PMD-661, Sound Devices Mixpre-3

Offline waltmon

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2043
  • Gender: Male
Re: MK4v lemo collette mounts
« Reply #12 on: March 31, 2016, 01:55:27 PM »
Thank you...just researching at this point. I was kinda looking at a 4v package that came with a lemosax etc...but it would be nice to be able to use my v2 as well...just looking at options.
KM140's, KM150's, U89's, Mixpre-10T II, 788T, F3

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4567
  • Gender: Male
  • Spreadicated
Re: MK4v lemo collette mounts
« Reply #13 on: March 31, 2016, 02:02:37 PM »
You are correct, but I was only referring to the  V caps!!  The 5 bump isn't as pronounced as the 4V

Mk's 5 also have a top end lift when run as cardioids but I believe its different than the mk4v's.
Mics: DPA ST4011ER & 4018ER
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline yug du nord

  • ...til things never seen seem familiar…
  • Trade Count: (56)
  • Needs to get out more...
  • *****
  • Posts: 5533
  • made with natural flavor
Re: MK4v lemo collette mounts
« Reply #14 on: March 31, 2016, 02:30:11 PM »
^^buy that package so I don't do something dumb.    :P  .....it seems to be a pretty fair price.
I assume that a pair of Lemo > PFA could be made by Naiant...  but you should ask Jon Stoppable first to confirm.
The Lemo cables were made/modified by Posthorn.  I asked the seller. 
.....got a blank space where my mind should be.....

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: MK4v lemo collette mounts
« Reply #15 on: March 31, 2016, 02:39:25 PM »
You are correct, but I was only referring to the  V caps!!  The 5 bump isn't as pronounced as the 4V

Mk's 5 also have a top end lift when run as cardioids but I believe its different than the mk4v's.

I have both; the 4V does seem to have a bit more of a boost. I also feel like I somewhat prefer the sound, but that's extremely subjective, given that my 4Vs are old, my 5s were bought new, and all Schoeps sound pretty alike...

The 41V, as noted, sounds the same as the 41; it's just a matter of preferring the convenience of vertical caps (I do)
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline waltmon

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2043
  • Gender: Male
Re: MK4v lemo collette mounts
« Reply #16 on: March 31, 2016, 02:42:36 PM »
I thought it was a tad on the high side for over 10 years old
KM140's, KM150's, U89's, Mixpre-10T II, 788T, F3

CA-14 > UBB > Tascam DR-2D

1 pound non-sequential $50.00 bills

Offline schoepsnbox

  • Trade Count: (46)
  • Taperssection Member
  • ***
  • Posts: 439
  • Gender: Male
  • Nbox...........Zero's and One's
Re: MK4v lemo collette mounts
« Reply #17 on: March 31, 2016, 02:47:45 PM »
I'd have to say that the mk6 caps sound different than all the caps mentioned here.  To my ears they sound the best of all schoeps caps but what do I know ;)

Offline edtyre

  • Trade Count: (85)
  • Needs to get out more...
  • *****
  • Posts: 2261
  • Gender: Male
  • Team Philly " No Excuses, Just Tapes"
Re: MK4v lemo collette mounts
« Reply #18 on: March 31, 2016, 05:09:57 PM »
I'd have to say that the mk6 caps sound different than all the caps mentioned here.  To my ears they sound the best of all schoeps caps but what do I know ;)

^^^x2
music>mics>pre>recorder

Offline drewloo

  • Friend of Salsa
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 3060
  • it's recreational
Re: MK4v lemo collette mounts
« Reply #19 on: March 31, 2016, 10:10:42 PM »
^^buy that package so I don't do something dumb.

No kidding.  Been looking at that package since Larry posted the link a few weeks ago.  Was ~3K at first.  I was thinking of sending the cables off to Robb to make some extensions for them (since they're only 8 feet) that would go between the lemos and collettes near the lemo end.  Then at the same time have some pfa's made that would also work with the extensions so they could be ran with the sax or any other pre w/ xlr connectors.  Did anyone find out how much voltage the power supply shown outputs?
« Last Edit: April 01, 2016, 07:20:11 AM by drewloo »

 

RSS | Mobile
Page created in 0.132 seconds with 48 queries.
© 2002-2024 Taperssection.com
Powered by SMF