Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: ts on February 06, 2018, 09:21:03 PM

Title: External power for Littlebox
Post by: ts on February 06, 2018, 09:21:03 PM
My version 1 Littlebox has an external power port. I’m going to have Ted make me a cable for it. Would like to use with batteries with USB A output. Any problems with this? Specifically this one:

https://www.anker.com/store/PowerCore-13000/A1215011

Thanks.

Title: Re: External power for Littlebox
Post by: willndmb on February 06, 2018, 09:25:47 PM
I have only used RC batteries and the cable Jon made me but I have Anker batteries for other things and they work fine.
Same with Rav
Title: Re: External power for Littlebox
Post by: spyder9 on February 14, 2018, 11:41:28 AM
I have a Littlebox V1 w/ the external jack.  I had Ted make me 3 different battery cables for the following bats:  9.6V RC, 9V DVD, and Tekkeon set at 9v.

That said, the 5V output won't cut it.  You need to discuss with Jon about possible modification to your LB.

 

     
Title: Re: External power for Littlebox
Post by: ts on February 14, 2018, 06:59:02 PM
I have a Littlebox V1 w/ the external jack.  I had Ted make me 3 different battery cables for the following bats:  9.6V RC, 9V DVD, and Tekkeon set at 9v.

That said, the 5V output won't cut it.  You need to discuss with Jon about possible modification to your LB.

 

   

Ted’s spec sheet gives a range of 5V - 16V for operating power. Unless the Version 1 is different?