Become a Site Supporter and Never see Ads again!
« previous next »
Pages: 1 [2] 3  All   Go Down

Author Topic: Marantaz PMD-661 - "Error D.In"  (Read 9840 times)

0 Members and 1 Guest are viewing this topic.

Offline DigiGal

  • AES Associate Member
  • Trade Count: (30)
  • Needs to get out more...
  • *****
  • Posts: 2583
  • Gender: Female
  • Stay healthy and safe!
    • DigiGal Internet Archive Recordings
Re: Marantaz PMD-661 - "Error D.In"
« Reply #15 on: November 29, 2014, 04:53:05 PM »
Quote from: pdxdanmusic on November 27, 2014, 12:52:00 PM
I tried switching on my PMD 661 from 24/48 to 24/96 without switching my SD MixPre-D and get the same message.

Quote from: DigiGal on August 19, 2014, 10:28:48 PM
Of note if the sample rate frequencies are not set the same then the PMD661 will give you the same error message.



The Sample Rate Frequency on the PMD661 must be set to the same as the source sample rate frequency or no joy!
Logged
Mics: AKG CK91/CK94/CK98/SE300 D-330BT | DPA 4060 4061 4266 | Neumann TLM 103 | Senn ME66/K6/K6RD MKE2 MD421 MD431 | Shure VP88 SM7B SM63L SM58 Anniversary Cables: Gotham GAC-4/1 Quad w/Neutrik EMC | Gotham GAC-2pair w/AKG MK90/3 connectors | DigiGal AES>S/PDIF cable Preamp: SD MixPre-D Recorders: SD MixPre 6 | Marantz PMD 661 Edit: 2011 27" 3.4GHz Quad i7 iMac High Sierra | 2020 13" MBA Quad i7 Catalina | Wave Editor | xACT | Transmission | FCP X 

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #16 on: December 01, 2014, 12:08:10 PM »
Quote from: larrysellers on November 24, 2014, 01:50:25 PM
What firmware version is your pmd661 running?

I'll have to check and post the version later tonight...
Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #17 on: December 14, 2014, 06:04:23 PM »
Quote from: larrysellers on November 24, 2014, 01:50:25 PM
What firmware version is your pmd661 running?

F/W Version is A1.17

Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline larrysellers

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 2152
  • Gender: Male
  • Qualified
Re: Marantaz PMD-661 - "Error D.In"
« Reply #18 on: December 14, 2014, 06:12:05 PM »
That is really old. Update it and your issues with the digital input should be fixed. It will also make the recorder compatible with larger, faster memory cards.
Logged

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #19 on: December 15, 2014, 08:28:44 AM »
Quote from: larrysellers on December 14, 2014, 06:12:05 PM
That is really old. Update it and your issues with the digital input should be fixed. It will also make the recorder compatible with larger, faster memory cards.

Any steps on how to update the f/w?

What's the current f/w version anyways?
Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline larrysellers

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 2152
  • Gender: Male
  • Qualified
Re: Marantaz PMD-661 - "Error D.In"
« Reply #20 on: December 15, 2014, 09:08:10 AM »
Most current is v2.05. Download it here: http://denonpro.com/products/view/pmd661#.VGfZhWdNdug , There is a pdf in the zip file with instructions.
Logged

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #21 on: December 15, 2014, 09:57:05 AM »
Quote from: larrysellers on December 15, 2014, 09:08:10 AM
Most current is v2.05. Download it here: http://denonpro.com/products/view/pmd661#.VGfZhWdNdug , There is a pdf in the zip file with instructions.

Thanks!
Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #22 on: December 15, 2014, 10:03:00 AM »
Quote from: larrysellers on December 15, 2014, 09:08:10 AM
Most current is v2.05. Download it here: http://denonpro.com/products/view/pmd661#.VGfZhWdNdug , There is a pdf in the zip file with instructions.

OK...so, dumb question. I'm assuming I need to d/l the latest f/w with the 661 connected to my PC via the USB, correct?

Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline larrysellers

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 2152
  • Gender: Male
  • Qualified
Re: Marantaz PMD-661 - "Error D.In"
« Reply #23 on: December 15, 2014, 10:15:26 AM »
Copy the .bin file to the root of the sd card. With Ac power connected, power on the recorder and follow the on-screen instructions.
Logged

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #24 on: January 21, 2015, 11:08:20 AM »
Quote from: larrysellers on December 15, 2014, 10:15:26 AM
Copy the .bin file to the root of the sd card. With Ac power connected, power on the recorder and follow the on-screen instructions.

So, I FINALLY got around to updating to the current F/W. Planning to tape Saturday night. Going to see if updating will now allow me to use the digi coax GAK right angle cable I bought.

If it doesn't, I have the Dynex digi coax that seems to work in my bag.

I wonder if the fact that the Dynex digi has gold connectors (I think) whereas the GAK digi has silver connectors plays a part in receiving the error message? This is the cable I had Ted make:
18" 75ohm Digital Cable w/ Switchcraft silver Right Angle
« Last Edit: January 21, 2015, 11:11:09 AM by TaperBryan »
Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #25 on: February 02, 2015, 08:52:09 AM »
Quote
I wonder if the fact that the Dynex digi has gold connectors (I think) whereas the GAK digi has silver connectors plays a part in receiving the error message? This is the cable I had Ted make:
18" 75ohm Digital Cable w/ Switchcraft silver Right Angle

So, the f/w upgrade didn't seem to correct the digi cable issue. The GAK digi cable with the silver Switchcraft right angle still yielded the "Error D.In" message. Plugged in the Dynex w/ gold connectors and no error message...
Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4568
  • Gender: Male
  • Spreadicated
Re: Marantaz PMD-661 - "Error D.In"
« Reply #26 on: February 03, 2015, 12:46:57 PM »
Quote from: TaperBryan on February 02, 2015, 08:52:09 AM
Quote
I wonder if the fact that the Dynex digi has gold connectors (I think) whereas the GAK digi has silver connectors plays a part in receiving the error message? This is the cable I had Ted make:
18" 75ohm Digital Cable w/ Switchcraft silver Right Angle

So, the f/w upgrade didn't seem to correct the digi cable issue. The GAK digi cable with the silver Switchcraft right angle still yielded the "Error D.In" message. Plugged in the Dynex w/ gold connectors and no error message...

Sounds like a cable problem!
Logged
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 > Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #27 on: February 03, 2015, 02:32:41 PM »
Quote from: jbell on February 03, 2015, 12:46:57 PM
Quote from: TaperBryan on February 02, 2015, 08:52:09 AM
Quote
I wonder if the fact that the Dynex digi has gold connectors (I think) whereas the GAK digi has silver connectors plays a part in receiving the error message? This is the cable I had Ted make:
18" 75ohm Digital Cable w/ Switchcraft silver Right Angle

So, the f/w upgrade didn't seem to correct the digi cable issue. The GAK digi cable with the silver Switchcraft right angle still yielded the "Error D.In" message. Plugged in the Dynex w/ gold connectors and no error message...

Sounds like a cable problem!

 :-\ - I just sent Ted a PM to see what my options are.

Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT

Offline DigiGal

  • AES Associate Member
  • Trade Count: (30)
  • Needs to get out more...
  • *****
  • Posts: 2583
  • Gender: Female
  • Stay healthy and safe!
    • DigiGal Internet Archive Recordings
Re: Marantaz PMD-661 - "Error D.In"
« Reply #28 on: February 03, 2015, 02:57:12 PM »
Impedance can be a critical factor.
Logged
Mics: AKG CK91/CK94/CK98/SE300 D-330BT | DPA 4060 4061 4266 | Neumann TLM 103 | Senn ME66/K6/K6RD MKE2 MD421 MD431 | Shure VP88 SM7B SM63L SM58 Anniversary Cables: Gotham GAC-4/1 Quad w/Neutrik EMC | Gotham GAC-2pair w/AKG MK90/3 connectors | DigiGal AES>S/PDIF cable Preamp: SD MixPre-D Recorders: SD MixPre 6 | Marantz PMD 661 Edit: 2011 27" 3.4GHz Quad i7 iMac High Sierra | 2020 13" MBA Quad i7 Catalina | Wave Editor | xACT | Transmission | FCP X 

Offline TaperBryan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3928
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
Re: Marantaz PMD-661 - "Error D.In"
« Reply #29 on: February 04, 2015, 08:37:01 AM »
Quote from: DigiGal on February 03, 2015, 02:57:12 PM
Impedance can be a critical factor.

Can you explain in more detail?
Logged
09/23/2020 rig update: AKG c480b(ck61/62/63) > NAIANT/pfa > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

03/22/19 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod) and/or Tascam DR-70D

12/17/11 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > EAA PSP-2 and/or Lunatec V3 > Marantz PMD-661 (Oade Bros. Warm Mod)

02/07/07 rig update: AKG c480b(ck61/62/63) > Canare StarQuad mic cables > Lunatec V3 and/or EAA-PSP2 > ODL-276 > Nomad JB3 and/or Sony TCD-D8 DAT
Pages: 1 [2] 3  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.075 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF