Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: 2manyrocks on November 14, 2014, 08:20:48 AM
-
So I picked up a ravpower 10400mah battery that has two USB power outlets. Using one to power a Tascam Dr60d. I'd like to use the other one to back up my Canon HFM500 camcorder. The camcorder charger outputs 5.3v at 1.5A has an odd sort of C channel shape to it.
Does anyone know of a power cable with a USB on one end and this type of power connector on the other? Or know the name of this power tip so I can search for it?
Here's a link to a replacement charger with the same specs and a better picture of the tip.http://calcellular-store.stores.yahoo.net/can-ca-110.html
-
Send Ted g a message I had him make me a similar cable to power a panasonic video camers and it works great
-
Interested too
Same recorders and battery
-
This is the only cable with the correct ends that I have found so far. Ordered one to see if it works.
http://www.ebay.com/itm/CA110-USB-CABLE-for-Canon-HF-R20-R21-R26-R27-R38-R205-R307-R306-/121460300558?pt=Camera_Cables_Cords&hash=item1c47991b0e
-
This is the only cable with the correct ends that I have found so far. Ordered one to see if it works.
http://www.ebay.com/itm/CA110-USB-CABLE-for-Canon-HF-R20-R21-R26-R27-R38-R205-R307-R306-/121460300558?pt=Camera_Cables_Cords&hash=item1c47991b0e
please keep me posted
To bad it isn't like 10'
Would be killer to have the battery in my bag on the floor with dr-60d and run up the tripod to camera
-
The USB connector is easy to find, however, but I'm having trouble finding the connector at the camera end. So I ordered the one from the ebay listing which will likely be long enough for me since I mount my camera on the 60d. I put the camera up high enough to shoot over people's heads. Not so great a system for monitoring audio levels.
If I'm up front, I use a wide angle accessory lens and shoot from a lower position. Then it's really convenient to have the 60d and the camera mounted together on a stand together.
If it comes down to it, I'm pretty sure this is a two wire power supply line that could be sliced and extended in length. I'd still like to find a source for that camera connector.