Become a Site Supporter and Never see Ads again!

Author Topic: ISO Church Audio Mic Bar....  (Read 572 times)

0 Members and 1 Guest are viewing this topic.

Offline Papaphunk

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 137
ISO Church Audio Mic Bar....
« on: December 15, 2017, 01:43:02 PM »
I wasn't sure to put this here, or in the Yard Sale Section.

I currently have 2 sets of Mic's with Clips (CA-14 Cards) and (CA-11 Omni's) - I am using a RODE Mic Bar for my Rode M5's and clipping these to the end.

I was curious if anyone had an ORTF or DIN designed Mic Bar for Church Audio Mics available. Looking for something to hold them in place

Also wondering how other folks place their CA Mics' (I know I know, just use a ruler  :D) Any input appreciated.

I was looking a a schoeps bar that popped up here last week, but went to another buyer....

Thanks folks !

*******************************************
CA-14 Cardoid Mic's - CA-11 Omni's - Rode M5 Mic's
CA 9200 PreAmp - CA UBB - Rolls Mic Power II B
Busman MOD Tascam DR-70D - TASCAM DR-100MKII 
*******************************************

Recordings on archive: https://archive.org/details/@papaphunk

Offline it-goes-to-eleven

  • Trade Count: (57)
  • Needs to get out more...
  • *****
  • Posts: 6702
Re: ISO Church Audio Mic Bar....
« Reply #1 on: December 15, 2017, 02:06:28 PM »
I make bars for the Church audio mics:

http://taperssection.com/index.php?topic=165024.0

The clips can interfere. There needs to be enough barrel on the cable side of the clip so the bar can grab the mic.

New product - Get your NEUMANN active mounting bars
Active microphone mounting bars for Schoeps and AKG, and Naiant AKG, ready to ship

Offline Papaphunk

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 137
Re: ISO Church Audio Mic Bar....
« Reply #2 on: December 15, 2017, 04:17:17 PM »
Great, thank you! Thought I saw a thread awhile back but couldn't find it.

I will email you in the next week or so to place an order.

*******************************************
CA-14 Cardoid Mic's - CA-11 Omni's - Rode M5 Mic's
CA 9200 PreAmp - CA UBB - Rolls Mic Power II B
Busman MOD Tascam DR-70D - TASCAM DR-100MKII 
*******************************************

Recordings on archive: https://archive.org/details/@papaphunk

Offline Papaphunk

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 137
Re: ISO Church Audio Mic Bar....
« Reply #3 on: January 15, 2018, 02:57:49 PM »
No response so far to my email from last week....so I'm still looking for something for my Church Audio Mics.

I used a clamp last night, from a friend of a taper which worked well. It was just a clamp with a bar coming out of it (maybe 6" long) that I was able to attach both mics to. Anyone use one of these, or have suggestion for where I might find such a clamp ?
*******************************************
CA-14 Cardoid Mic's - CA-11 Omni's - Rode M5 Mic's
CA 9200 PreAmp - CA UBB - Rolls Mic Power II B
Busman MOD Tascam DR-70D - TASCAM DR-100MKII 
*******************************************

Recordings on archive: https://archive.org/details/@papaphunk

Offline The Other Chris

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1442
  • Gender: Male
    • My list:
Re: ISO Church Audio Mic Bar....
« Reply #4 on: January 15, 2018, 03:21:54 PM »
Not too long ago there was a guy using a shock mount with a plain old 12” ruler stuck through it and clipping the mics on the ends. It was pretty clever and might do in a pinch. 

Offline Papaphunk

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 137
*******************************************
CA-14 Cardoid Mic's - CA-11 Omni's - Rode M5 Mic's
CA 9200 PreAmp - CA UBB - Rolls Mic Power II B
Busman MOD Tascam DR-70D - TASCAM DR-100MKII 
*******************************************

Recordings on archive: https://archive.org/details/@papaphunk

Offline voltronic

  • Trade Count: (27)
  • Needs to get out more...
  • *****
  • Posts: 2432
  • Gender: Male
Re: ISO Church Audio Mic Bar....
« Reply #6 on: January 16, 2018, 09:25:35 PM »
Not too long ago there was a guy using a shock mount with a plain old 12” ruler stuck through it and clipping the mics on the ends. It was pretty clever and might do in a pinch.

There was definitely more than one guy doing this; I was one of them but it definitely wasn't my original idea. The only new thing I added: I bought a cheap aluminum ruler and cut each end to a non-symmetrical point such that clipping the mics one way would make a 110deg opening angle and the other way 90deg.  The ruler went into a cheap shockmount that looks like a plastic cylinder with crossed rubber bands at each end.  It's all these mics really need.
DPA 4061 | Line Audio CM3 | Naiant X-Q
Naiant PFAs | Shure FP24
Tascam DR-70D JWMod | Sony PCM-M10

Tascam DR-70D FAQ
Team Line Audio
Quote
I am hitting my head against the walls, but the walls are giving way.    ///    If a composer could say what he had to say in words he would not bother trying to say it in music.
- Gustav Mahler

 

RSS | Mobile
Page created in 0.153 seconds with 30 queries.
© 2002-2018 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company