Become a Site Supporter and Never see Ads again!

Author Topic: WindTech 10379 - Military High Density Windscreen  (Read 704 times)

0 Members and 1 Guest are viewing this topic.

Offline BleedingMe

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 7
WindTech 10379 - Military High Density Windscreen
« on: December 26, 2017, 04:49:50 AM »
I was looking around for some Windjammers/Dead Cats/Fur Windscreens or whatever you want to call them for my SP-CMC-8's (Cardiod). They are pretty inexpensive on the Sound Pros website and even cheaper on eBay from China. But I came across the  WindTech 10379's - https://www.bhphotovideo.com/c/product/1092891-REG/windtech_10379_high_density_military.html Has anyone had any experience with them and they do the job they purportedly say they do? 

I run stealth, so the side of the mics are fairly well shielded by fabric, so mainly just worried about the front of the mics. I'm not too worried about a slight drop in frequencies as I can EQ that back in if needed and know from experience with other mics, that prevention is far better than the cure.

Also, does anyone know of a more low-profile clip that will fit for these mics? I got the standard clips with them, but the top protrudes too much when they are clipped on and would like a better spacing, ie like the Shure RK183T1 which will not fit them.
« Last Edit: December 26, 2017, 05:16:47 AM by BleedingMe »

 

RSS | Mobile
Page created in 0.081 seconds with 23 queries.
© 2002-2018 Taperssection.com
Powered by SMF