Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Can anyone with a schoep VMS pre help out???  (Read 3169 times)

0 Members and 1 Guest are viewing this topic.

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4568
  • Gender: Male
  • Spreadicated
Can anyone with a schoep VMS pre help out???
« on: October 26, 2011, 04:50:53 PM »
I need to know the DC resistance between its signal inputs (pins
2 or 3 on the Binder/KCY) and ground.  While we are asking for favors, maybe some one could verify the VMS
low-volt supply (pin 4) is 6V as specified on the VMS diagram.

Any help would be greatly appreciated!!  TIA
 
« Last Edit: October 26, 2011, 05:28:18 PM by jmbell »
Logged
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 (matched)> Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Can anyone with a schoep VMS pre help out???
« Reply #1 on: October 26, 2011, 05:13:17 PM »
For what? You building a VMS? :P ;D
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline hi and lo

  • Trade Count: (38)
  • Needs to get out more...
  • *****
  • Posts: 2294
Re: Can anyone with a schoep VMS pre help out???
« Reply #2 on: October 26, 2011, 05:19:43 PM »
Quote from: F.O.Bean on October 26, 2011, 05:13:17 PM
For what? You building a VMS? :P ;D

Sort of...
Logged

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Can anyone with a schoep VMS pre help out???
« Reply #3 on: October 26, 2011, 10:50:03 PM »
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline StuStu

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 2860
  • Gender: Male
Re: Can anyone with a schoep VMS pre help out???
« Reply #4 on: November 02, 2011, 01:43:09 PM »
Quote from: jmbell on October 26, 2011, 04:50:53 PM
I need to know the DC resistance between its signal inputs (pins
2 or 3 on the Binder/KCY) and ground.  While we are asking for favors, maybe some one could verify the VMS
low-volt supply (pin 4) is 6V as specified on the VMS diagram.

Any help would be greatly appreciated!!  TIA


VMS02IB manual in PDF was posted by gmm6797 in this thread: http://taperssection.com/index.php?topic=57349.msg753909#msg753909
Logged
MK5, MK8, MK41, KM184D, CK77, B3 ---CMD 2U XT, KC5, KCY, AKI---KCY Tinybox, Ugly BB---AETA 4MinX, PMD661 MKII, R-26, M-10, MR-1

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4568
  • Gender: Male
  • Spreadicated
Re: Can anyone with a schoep VMS pre help out???
« Reply #5 on: November 02, 2011, 04:34:58 PM »
It's not needed anymore, problem solved

Quote from: StuStu on November 02, 2011, 01:43:09 PM
Quote from: jmbell on October 26, 2011, 04:50:53 PM
I need to know the DC resistance between its signal inputs (pins
2 or 3 on the Binder/KCY) and ground.  While we are asking for favors, maybe some one could verify the VMS
low-volt supply (pin 4) is 6V as specified on the VMS diagram.

Any help would be greatly appreciated!!  TIA


VMS02IB manual in PDF was posted by gmm6797 in this thread: http://taperssection.com/index.php?topic=57349.msg753909#msg753909
Logged
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 (matched)> Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.071 seconds with 35 queries.
© 2002-2024 Taperssection.com
Powered by SMF