Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: crazylegs on May 25, 2018, 04:17:48 AM
-
Hi,
The last few shows I have recorded with my M10 MK41s and tiny box have been riddled with spots of diginoise. I was wondering if anyone knows what might be the cause of the problem. Any help would be appreciated.
Thanks!
-
Do you have other capsules that you can test to make sure the MK41s are really the problem here?
Have you tried different cables? Because 9 out of 10 times, problems like these are usually caused by a bad solder joint in a cable connector.
-
you didn't mention the deck being used either.......
-
you didn't mention the deck being used either.......
Looks like M10
-
you didn't mention the deck being used either.......
Looks like M10
oops. not enough coffee yet! in that case was the card formatted prior to the shows?
-
When I first started stealthing, I quickly learned to secure the cable to the recorder so that the mini cable couldn't move at all. Even if the cable is fine, it could create that digi-noise in the recording when it moved around at all.