Topic: desparately need help dr2d dual

[red]

My show is tonite and my settings all defaulted
  I don't have access to manual right now and I can't figure out how to set levels separately for mic-in and line-in on the dual mode.  If anyone could help ill be forever grateful.  Thanks!!""

[danny3]

Step 1: menu>input>mic gain LOW
Step 2: hold DUAL button down; mode: LINE (I normally set level to 100 (don’t go lower than 95 I think)
Step 3: input level buttons on  side of recorder adjust mic input gain; set no lower than 67. You can raise this on the fly as necessary.
(If a soft/acoustic situation,  setting INPUT level to MED may be necessary. Sound check recommended) Of course depending on your set up you might adjust gain with whatever you are feeding your mics with)
During recording pushing DUAL button will toggle between mic and line levels on display.
Happy recording!

[red]

Thank you SO much!!!!

[flipp]

the manual is available online - http://tascam.com/product/dr-2d/downloads/ - if you want more detailed instructions

[red]

Thx flipp ...

[F.O.Bean]

Let us know how it turns out!!!

[red]

thx!  things turned out really well (came out w/ two great recordings...one possibly a b-box issue or spl overload...i'll be back soon w/ more details and seeking input).