Become a Site Supporter and Never see Ads again!

Author Topic: Line level A-D converter recomendations  (Read 6877 times)

0 Members and 1 Guest are viewing this topic.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Line level A-D converter recomendations
« Reply #15 on: December 01, 2006, 01:20:35 AM »
why not use your V3? If your line signal is hot you can enagage the internal -15db pads.



i used to use mine all the time like that, with the pads

are they -15db pads? i thought they were -20db pads ???
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped  that are in circulation
Re: Line level A-D converter recomendations
« Reply #16 on: December 01, 2006, 02:54:48 AM »
20 i believe

Offline BC

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 2269
  • Gender: Male
  • Bongo Bongo
Re: Line level A-D converter recomendations
« Reply #17 on: December 01, 2006, 06:15:57 PM »
why not use your V3? If your line signal is hot you can enagage the internal -15db pads.



i used to use mine all the time like that, with the pads

are they -15db pads? i thought they were -20db pads ???

My bad. Just grabbed that number off the top of my head, I have never actually used the pads.  :P      :) 
In: DPA4022>V3>Microtracker/D8

Out: Morrison ELAD>Adcom GFA555mkII>Martin Logan Aerius i

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped  that are in circulation
Re: Line level A-D converter recomendations
« Reply #18 on: December 01, 2006, 06:25:14 PM »
i couldnt remember exactly either, its been so long since i used em.

ive used them on a bunch of SBD patches archiving a local band, worked great

Offline JNT

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1123
Re: Line level A-D converter recomendations
« Reply #19 on: December 03, 2006, 10:33:10 PM »
why not use your V3? If your line signal is hot you can enagage the internal -15db pads.


I haven't run my V3 that way yet but I certainly could. That is what I would use for taping a show from a sbd feed.

What I am looking for would mostly be used in the equipment rack I am putting together for when I am paid to do live sound and recording. I was originally thinking of something battery powered in the event I wanted to use it for taping off the board while also running my mics.

Good to hear that people have successfully used the v3 for  patchin out of a sound board.  Have you guys needed to use any attenuation other than the V3s build in pads?

Joe



« Last Edit: December 03, 2006, 10:47:22 PM by JNT »
Mostly retired from taping.

JW Mod AKG 460+CK61/CK1/CK2/CK63>V3>
or
AKG CK1x/CK2x/>MK46>JW MOD C460>V3>

AKG C34>

>R44

"Drinking will help us plan!"  Moe Szyslak

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped  that are in circulation
Re: Line level A-D converter recomendations
« Reply #20 on: December 04, 2006, 01:54:19 AM »
v3 pads were def enough for all the sbd patches ive done

Offline Kyle

  • Made it back alive!
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2169
  • Gender: Male
  • Still loves his mic pre's
Re: Line level A-D converter recomendations
« Reply #21 on: December 04, 2006, 02:50:17 AM »
You could jump right into the deep end with one of these...

Couldn't have designed it better myself (except for the AC power issue...)

http://www.benchmarkmedia.com/adc1/

Schoeps CMC6/MK4  //  Nakamichi CM-300/CP-1/CP-2
E.A.A. PSP-2   // Grace Design Lunatec V2
Sonic AD2K+ 
Tascam HD-P2 (Oade BCM)  //  Sony TC-D5 PROII
 
Duncan - 12/84 > 8/8/05 - Miss you everyday

Offline ingsy

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 489
  • Gender: Male
Re: Line level A-D converter recomendations
« Reply #22 on: December 05, 2006, 01:49:18 PM »
How about an Apogee AD-500?  They usually go for about $225 used and (IMO) sound great.  The only problem is that they are old and not easily repaired. 
Mics: AKG C 414 B-XL II/ST, Nevaton MCE 400
Other: M148, AD-500e, AD-1000, ACM PMD 660, R09-HR, JB3

 

RSS | Mobile
Page created in 0.139 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF