Taperssection.com
Gear / Technical Help => Cables => Topic started by: AT853rxwh on June 17, 2004, 06:05:15 PM
-
Had a pic of the mini rig with the small interconnects, and got a few questions, so here is a better pic of em
-
The connectors are switchcraft, the males are cut down and epoxy filled, the female ones have the rubber strain relief removed and also epoxy filled. The cable is mic cable from Audio Technica.
-
Those are sweet.
I need to make myself some here soon, but I'll be using Nuetrik(sp?) connectors. Did you just cut the males with a hack saw? And the epoxy can be had from Home Depot?
I'll have to cut down the threading of the Nuetriks and I don't wanna bend them with a clamp, got any ideas?
-
Those are sweet.
I need to make myself some here soon, but I'll be using Nuetrik(sp?) connectors. Did you just cut the males with a hack saw? And the epoxy can be had from Home Depot?
I'll have to cut down the threading of the Nuetriks and I don't wanna bend them with a clamp, got any ideas?
I used a dremel with a cutting stone... The epoxy is marine epoxy, they should have something like it at home depot....
-
Thanks
Dremmel makes perfect sense, I'll have to write that down with things I still need, like a solder :) Good thing my friends have them for now!
-
You could even get them smaller with right angled XLRs cut down, eh?
ANDY
-
You could even get them smaller with right angled XLRs cut down, eh?
ANDY
maybe, but didnt need em shorter... plus the switchcrafts were free ;D