Become a Site Supporter and Never see Ads again!

Author Topic: V2 Battery Options  (Read 22021 times)

0 Members and 1 Guest are viewing this topic.

Offline kindms

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5950
    • The Breakfast
Re: V2 Battery Options
« Reply #45 on: May 13, 2018, 08:17:46 AM »
The maxoak $99 deal is up again on amazon.

However, if all you need to do is power your V2, the talentcell battery linked below will more than do the trick at a fraction of the price.


https://www.amazon.com/gp/aw/d/B00ME3ZH7C/ref=mp_s_a_1_1?ie=UTF8&qid=1523462156&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=talentcell&dpPl=1&dpID=41gbnCwsodL&ref=plSrch

supposed to be another lightening deal at 345PM today
AKG c426, AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

Offline kindms

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5950
    • The Breakfast
Re: V2 Battery Options
« Reply #46 on: May 14, 2018, 06:20:25 PM »
540pm tomorrow says is another lightening deal fwiw
AKG c426, AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

Offline lsd2525

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 3397
  • Gender: Male
  • Eschew obfuscation
Re: V2 Battery Options
« Reply #47 on: May 16, 2018, 01:28:45 PM »
Anyone know an easy/effective way to knock the 12v output down to 9v on this thing? Some sort of adapter?
Mics: SKM184's; ADK A51s; AT4041; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-701D

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6205
  • The plural of anecdote is not data
Re: V2 Battery Options
« Reply #48 on: June 11, 2018, 09:40:58 AM »
i have a 7.4V liion i bought for the mytek that is laying around

2 batts and a charger
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline kindms

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5950
    • The Breakfast
Re: V2 Battery Options
« Reply #49 on: June 11, 2018, 04:56:50 PM »
If anyone cares I was doing a time test on my V3 running the maxoak. So AKG414XLS/ST over the years I have found these mics to be POWER HUNGRY when run with the V3. So after about 5 hours of 414 >V3>COAX > the Maxoak dropped 1 light.

I bought 2 of those batteries. 1 to run the preamp and 1 to run the HDP2. the HDP@ never lost a light during the same timed session.
AKG c426, AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

 

RSS | Mobile
Page created in 0.062 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF