Gear / Technical Help > Battery Boxes, Preamps, Mixers, ADCs, and Processors
Lunatec v2
Spitzchad:
Looking for a battery supply for a V2 any help is appreciated
goodcooker:
You can use the regular old 9V DVD batteries if you still have any sitting around that are good. You can also use RC car batteries. Both of these are old style but still viable solutions. I use an old 9V DVD battery and get around 5 hours.
There's a ton of new batteries on the market. Any one that provides 9V (really between 6-12V) will run your V2. Lots of folks like this one https://www.amazon.com/TalentCell-Rechargeable-11000mAh-14500mAh-26400mAh/dp/B016BJCRUO
Have a look through these threads for more info http://taperssection.com/index.php?topic=180181.15
pohaku:
The aforementioned Talentcell works great. See Ted about a cable if you need one.
rocksuitcase:
the V2 can be either a 6V or 12V, can be changed inside with jumpers. (see the following posts regarding this)
For our very old 6V v2, we went overboard thinking of festivals and got the Maxoak- caveat- this is WAY more power and weight than most will require for a V2.
https://www.amazon.com/MAXOAK-50000mAh-Portable-External-Notebook-Most/dp/B00YP823NA
kindms:
--- Quote from: rocksuitcase on September 14, 2018, 12:52:49 PM ---the V2 can be either a 6V or 12V, can be changed inside with jumpers.
For our very old 6V v2, we went overboard thinking of festivals and got the Maxoak- caveat- this is WAY more power and weight than most will require for a V2.
https://www.amazon.com/MAXOAK-50000mAh-Portable-External-Notebook-Most/dp/B00YP823NA
--- End quote ---
im pretty sure only the v3 can be changed via jumpers
Navigation
[0] Message Index
[#] Next page
Go to full version