Become a Site Supporter and Never see Ads again!

Author Topic: robust optical toslink cables rec?  (Read 15553 times)

0 Members and 1 Guest are viewing this topic.

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
robust optical toslink cables rec?
« on: December 15, 2003, 12:04:20 PM »
Yes, I've searched through the forum, :P and most references I've found point to the SoundPro and readily available EBay cables.  Not what I'm looking for.  Here's what I am looking for in an optical cable:

[1] robust, thick cabling so I can coil it without fear of kinking - something where the cable is as thick as the body of the toslink connector
[2] solid, meaty connectors
[3] right-angle toslink on one end (optional)
[4] right-angle mini on other end (optional)

Does such a thing exist?  I've searched online with poor results (but that's not surprising b/c I suck at the internet).
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

jpschust

  • Guest
  • Trade Count: (0)
Re:robust optical toslink cables rec?
« Reply #1 on: December 15, 2003, 12:15:20 PM »
i like my monster cable.  its not quite as robust as you are saying but its pretty sturdy and it seems to handle coiling well.  that being said i wouldnt bend it in half

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10810
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re:robust optical toslink cables rec?
« Reply #2 on: December 15, 2003, 12:33:01 PM »
I'd like to know how many people use optical cables in the field? It's my undrestanding that it's not as accurate as the coax S/PDIF. I've always used coax S/PDIF.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #3 on: December 15, 2003, 12:39:48 PM »
I'd like to know how many people use optical cables in the field? It's my undrestanding that it's not as accurate as the coax S/PDIF. I've always used coax S/PDIF.

Gobs and gobs of discussion about coax v. optical over at CableAsylum.  Basically, the issue is jitter (and people's heated disagreements over whether it's audible).  I figure a short run (1m, tops), HQ glass optical cable will suit my purposes just fine: V3 > AES/EBU > Hosa ODL-312 > optical > JB3.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #4 on: December 15, 2003, 12:58:39 PM »
FWIW. I have 6 different optical cables at the house. They all suck except the sound professional one.

It's also r angle on both ends. Good luck getting anything fatter/more robust. I've searched with no luck.
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #5 on: December 15, 2003, 01:00:05 PM »
FWIW. I have 6 different optical cables at the house. They all suck except the sound professional one.

Thanks for the feedback.  I'll go back and look at 'em again.  The right angles are definitely a big plus!  It just look so...flimsy.

It's also r angle on both ends. Good luck getting anything fatter/more robust. I've searched with no luck.

I was afraid of that.   :(
« Last Edit: December 15, 2003, 01:01:40 PM by Brian Skalinder »
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Nick in Edinboro

  • Wishes he was fishing right now...
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2924
  • Gender: Male
  • Toshiba SD3690 > HK AR-20 > B&K ST-140 > Axiom M22
    • moepics.com - share your shots of moe.
Re:robust optical toslink cables rec?
« Reply #6 on: December 15, 2003, 01:01:49 PM »
Quote
[1] robust, thick cabling so I can coil it without fear of kinking - something where the cable is as thick as the body of the toslink connector
[2] solid, meaty connectors

From highest priced to lowest:

Phoenix Gold 3.25' $26.15


Acoustic Research Pro II 3' Cable $24.85


Dayton Digital Optical Cable 1.5' $6.90(and what I own now)


I've order from this company many times and have been very happy with everything.  Finding those "optional" requirements won't happen, but you can find the adapters for this (right angels, and miniplugs) on Parts Expresses site as well if your interested...
Oktava MC012's (dorseymod) > UA-5 (digmod) > JB3
http://braintuba.no-ip.com

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #7 on: December 15, 2003, 01:10:08 PM »
damn those look robust  ::)
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #8 on: December 15, 2003, 01:12:46 PM »
damn those look robust  ::)

Exactly my point.  Not gonna be easy, likely not even possible, to find what I'm looking for.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Nick in Edinboro

  • Wishes he was fishing right now...
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2924
  • Gender: Male
  • Toshiba SD3690 > HK AR-20 > B&K ST-140 > Axiom M22
    • moepics.com - share your shots of moe.
Re:robust optical toslink cables rec?
« Reply #9 on: December 15, 2003, 01:14:07 PM »
damn those look robust  ::)

I think that Phoenix Gold is about the most "robust" optical cable I've seen..

If you've got another which "bests" my robustness it can only benefit the Ska-man...  ;)
Oktava MC012's (dorseymod) > UA-5 (digmod) > JB3
http://braintuba.no-ip.com

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re:robust optical toslink cables rec?
« Reply #10 on: December 15, 2003, 02:46:05 PM »
I bought the Radio Shack Optical cable and 1/8 adapter.  It is your typical "thick" cable, but no tree-trunk...

I think I read somehwere that the RatShack stuff is relabeld Monster?!?

Anyways, my cable came coiled in a plastic box/case/thingy...

As I have no other means to store, carry, protect the cable, I keep it in its plastic container...  If it was packages for shpping and sale this way, I gotta think it'll survive in my field bag this way...

We'll see - I'm hunting for a better method of storage...

Terry


***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:robust optical toslink cables rec?
« Reply #11 on: December 15, 2003, 03:03:51 PM »
How secure are those plugs? If the cable is so robust that it out-robusts the input jack, then what's the use?

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:robust optical toslink cables rec?
« Reply #12 on: December 15, 2003, 03:06:41 PM »
What I mean is, what if the cable is so heavy that the connection becomes compromised? Pull outs, bending, overall stress on the jack...

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #13 on: December 15, 2003, 03:08:14 PM »
How secure are those plugs? If the cable is so robust that it out-robusts the input jack, then what's the use?

 :lol:  This is true, Armen.  I knew what you meant.  I'm looking for balance here.  Most of the cables I've seen so far are thin, flimsy, almost brittle plastic cables which feel like they'll break if I touch 'em, attached to flimsy, plastic connectors which feel like they'll break just pulling off the protective nub.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #14 on: December 15, 2003, 03:15:28 PM »
How secure are those plugs? If the cable is so robust that it out-robusts the input jack, then what's the use?

Oh, yeah, and forgot to add:  typical F-ing architecture student response!
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:robust optical toslink cables rec?
« Reply #15 on: December 15, 2003, 04:14:12 PM »
I have the Acoustic Research cable... I'll be happy to send it your way if you want to try it out.  You'll have to find a TOSlink>mini adaptor, though.

I think you're going to be happiest with the soundpro's cable that Jeff was talking about; it's the best one I've found.
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #16 on: December 15, 2003, 04:19:43 PM »
I ordered the SP cable with right-angle toslink and mini connectors.  I figure I oughta have 2 cables, anyway, and not having to deal with right-angle and/or mini adapters will be nice.

I'm still gonna pick up another one, though.  Seems like a lot of people over on CableAsylum rave about glass - not plastic - optical cables.  Can't hurt to have a backup, anyway.  Going to do some more research on the ones Nick posted.  I also found the AR cables and some others I'm gonna look into: SonicWave, Finest Glass, and Apature to name a few.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:robust optical toslink cables rec?
« Reply #17 on: December 15, 2003, 04:23:17 PM »
they sell the AR cables at BestBuy down here...
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:robust optical toslink cables rec?
« Reply #18 on: December 15, 2003, 04:25:39 PM »
How secure are those plugs? If the cable is so robust that it out-robusts the input jack, then what's the use?

Oh, yeah, and forgot to add:  typical F-ing architecture student response!

Especially this:

what's the use?

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #19 on: December 15, 2003, 04:27:44 PM »
Especially this:

what's the use?

You mean they teach architecture students to design stuff functionally?!?  Could've fooled me with some of the buildings I've been in down here, including my current office.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:robust optical toslink cables rec?
« Reply #20 on: December 15, 2003, 04:30:54 PM »
No, I mean, we're all jaded.
Sounds like some Clemson grad designed your building!

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #21 on: December 15, 2003, 04:53:30 PM »
No, I mean, we're all jaded.
Sounds like some Clemson grad designed your building!

Don't get me started!  Oh, wait...I already got me started.  Let's just say they asked for employee feedback, but implemented rather poorly.  For example:

Employees wanted the windows - only 2 of the 4 sides have windows  >:( - to be public spaces.  So the architects made them hallways.  Not conference rooms, or break rooms, or lounge areas.  Hallways.  I guess hallways are public spaces.  WTF.  And get this: the most frequently used hallways in the building:  4 of our 6 conference rooms.  Pathetic.  Then there're the light switches behind doors, the thermostat controls which activate the environmental controls in a completely different area of the building, office internal-windows with blinds on the outside of the office, the key-fob security access in the warehouse section of the building (but not the main employee entrance)...blah blah blah...I could go on.

'Course, this is the same company that won't buy a $400 printer for our area (8 employees), so we have to walk the loooooong way to the main printer (because all the conference rooms which are the best hallways are actually being used for, well...meetings).

Management apparently isn't capable of simple math: Each round trip takes 3 minutes.  Each employee makes 5 round trips a day.  Management pays these employees an average of ~$50k/yr.  You do the math.  Not to mention lost productivity due to interruptions along the way, broken train of thought, etc.

Yes, I live in Dilbert-land.  And - currently - I'm unhappy about it.   >:(  Grrrrr.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:robust optical toslink cables rec?
« Reply #22 on: December 15, 2003, 05:05:55 PM »
Wow, that's a lot to reply to. I think I'd only try it if I was dissatisfied with my job and didn't want to be productive. ;)
So four of your conference rooms are actually hallways?

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #23 on: December 15, 2003, 05:17:30 PM »
Wow, that's a lot to reply to. I think I'd only try it if I was dissatisfied with my job and didn't want to be productive. ;)
So four of your conference rooms are actually hallways?

Four of our 6 conference rooms are *used* as hallways because it's the easiest/fastest way to get from one location to another.  There's no way hallway to get through the interior of the building, basically, hence people use the interconnected conference rooms to do so.  The hallways basically just run around the outisde perimeter of the space.  Dumb.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re:robust optical toslink cables rec?
« Reply #24 on: December 15, 2003, 05:18:46 PM »
Ah... sounds like shitty planning to me. ;)
Light switches behind doors are my favorite!

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:robust optical toslink cables rec?
« Reply #25 on: December 15, 2003, 07:50:51 PM »
FWIW, in addition to the Sound Pros SP-TMOC-RA toslink right-angle to mini right-angle cable, I also picked up from CablesAmerica (the obsessive side of me insists I have 2 cables in case one fails.):

1m Sonicwave Glass Optical ($24.91, compare v. $50 Sound Pros SP-TOC-99HQ)

and

Velocity toslink to toslink right angle adapter ($2.22, compare v. $5 Sound Pros SP-TOC-90)
Velocity toslink to mini right angle adapter ($2.22, compare v. $5 Sound Pros SP-MINI-90)

I'll probably still use the Sound Pros SP-TMOC-RA toslink right-angle to mini right-angle all-in-one cable so I don't have to mess with the adapters.  But damn, for the same price the one from CA sure looks a helluva lot more robust.  Just no damn right-angles built-in.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: robust optical toslink cables rec?
« Reply #26 on: November 16, 2004, 08:06:58 PM »
decisions, decisions....

when i get my v3 back, id like to get a nice optical cable, either that sonicwave one skalinder posted in this thread, or the phoenix gold one that nick posted

so whats up w/ the rt angle adapters ??? are the sturdy and reliable?

the damn sp ones are so easy to work with, ya know

so any opinions are welcome please, how does good optical cable>rt angle adapter work ??? and by work i men how sturdy/reliable

thanks,

bean
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: robust optical toslink cables rec?
« Reply #27 on: November 16, 2004, 08:11:32 PM »
Honestly, the SP molded-RA cable I have is so damn convenient - and I'm so paranoid about using the right-angle adapters - it's the only one I use.  I'm just careful with it, as I am all of my gear.  I still carry my Sonicwave + an adapter, but only as a backup.  And I haven't needed it yet.

FWIW, someone posted an EBay link a while ago to an EBay source for the same cable - about $15 cheaper than SP.  But I don't remember where, who, etc.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: robust optical toslink cables rec?
« Reply #28 on: November 16, 2004, 08:19:46 PM »
Bean, Bean, Bean...you should know better than to double-post your questions, especially a discussion post - this one - in the Archival Info forum!  AIF post deleted.   8)
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: robust optical toslink cables rec?
« Reply #29 on: November 16, 2004, 08:25:20 PM »
sorry, i was just bumping two great threads for someone in my predicament 8)

so, the thing is, i have a sp one, except its a 6ft one, i may just nylon tie it to my target rack and be done w/ it 8)

i just wanted something beefy :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Ed.

  • your popsicle's melting
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8662
  • Gender: Male
  • FJ Baby!
Re: robust optical toslink cables rec?
« Reply #30 on: November 17, 2004, 12:59:34 PM »
call me crazy, but i'm a fan of my $5 cheapy from ebay.  its not all that robust, but its quite thick, has metal ends, and i've put it thru hell and back.  maybe i should listen to my recordings more closely, but i've never had a bad recording due to the optical cable...at least i don't think i have.

wouldn't glass cables be bad in the field, seems like they'd do a lot better in a stationary position behind my stereo/tv


Because nothing says "I have lots of money and am sort of confused as to how to spend it" like Bose.

Offline Ed.

  • your popsicle's melting
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8662
  • Gender: Male
  • FJ Baby!
Re: robust optical toslink cables rec?
« Reply #31 on: November 17, 2004, 01:10:24 PM »
yeah, but that doesn't mean they always are.

edit: for example - when you're drunk after a show, and don't feel like packing up, so you just shove everything in your bag and hope it closes.  heh, i've been there once or twice.


Because nothing says "I have lots of money and am sort of confused as to how to spend it" like Bose.

Offline Tony B

  • Needs more sun.
  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1375
  • Gender: Male
  • My primitive mind can't grasp these concepts.
Re: robust optical toslink cables rec?
« Reply #32 on: November 17, 2004, 02:36:44 PM »
I've got the Pheonix Gold opti cable and it hasn't let me down yet. Granted, I don't tow my 1 year old daughter behind it, or swing it around my head when I get into a venue.... ;)
Coffee is for Closers

MG m200>AM Hyperconducters>V3>JayBeeThree/h120

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: robust optical toslink cables rec?
« Reply #33 on: November 17, 2004, 02:38:12 PM »
hehe, i do that somewtimes ed, but nothing gets damaged the way my bag is setup

tony b, what kind of adapters do you have on it to go from toslink>mini ???
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Tony B

  • Needs more sun.
  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1375
  • Gender: Male
  • My primitive mind can't grasp these concepts.
Re: robust optical toslink cables rec?
« Reply #34 on: November 17, 2004, 02:47:54 PM »
Hm...cablesamerica, I think? To be honest I don't remember...John R pointed me toward a cables site that has every adapter known to man....These adapters are really nice for going into the JB3...they sit well in the "input" with no case-dremmeling needed.

I'm gonna go back and score some Right Angle toslink>toslink for my V3, I think...
Coffee is for Closers

MG m200>AM Hyperconducters>V3>JayBeeThree/h120

jpschust

  • Guest
  • Trade Count: (0)
Re: robust optical toslink cables rec?
« Reply #35 on: November 17, 2004, 02:51:23 PM »
Nice thread very informative, thanks!
One question I have and have not had much looking for.
Does anyone make a pure glass adaptor?
I can't see much sense in getting a nice glass cable and then putting a plastic adaptor on the end.
Seems like it defeats the whole purpose?
I called sound professionals up and their SP-Mini-90 is made of plastic with a glass end?
Not sure if he meant it was glass inside or if the connector was glass but the insides were plastic.
So it seems it would be glass>plastic>glass>unit


i have a couple of bettercables.com opitcals that i think are the best i've seen in a long time.  would you like to try one?

Offline Ed.

  • your popsicle's melting
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 8662
  • Gender: Male
  • FJ Baby!
Re: robust optical toslink cables rec?
« Reply #36 on: November 17, 2004, 03:01:37 PM »
hehe, i do that somewtimes ed, but nothing gets damaged the way my bag is setup

yeah, my bag is pretty safe when i do that too, but i still feel bad doing it.  sometimes tho, i'd really do more harm than good if i unhooked everything properly.


Because nothing says "I have lots of money and am sort of confused as to how to spend it" like Bose.

Offline Massive Dynamic

  • Trade Count: (21)
  • Taperssection All-Star
  • ****
  • Posts: 1421
  • Gender: Male
  • 20 years of the best in apocalyptic gothic metal
Re: robust optical toslink cables rec?
« Reply #37 on: November 17, 2004, 03:43:20 PM »
Although I don't use an optical cable in the field, here's my 2 cents.

Here's the ebay seller with cables like SP.  I have one, and it's fine.

I also have a Van den Hul Optocoupler; advertised as having exceptionally tight connections, so it's probably not ideal for frequent connect/disconnect, and it's more expensive than some.  I have this in my home system.

There's also a plastic fiber option that might fare better in a cramped gear bag. The Analysis Plus optical cable looks beefy, and is not expensive. HTH
« Last Edit: October 11, 2006, 10:06:54 PM by CliveStaples »
Naiant X-X > SP-SPSB-1 > M10
Superlux S502 > Denecke PS-2 > Hosa MIT-435 > M10

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: robust optical toslink cables rec?
« Reply #38 on: November 17, 2004, 03:48:18 PM »
Nice thread very informative, thanks!
One question I have and have not had much looking for.
Does anyone make a pure glass adaptor?
I can't see much sense in getting a nice glass cable and then putting a plastic adaptor on the end.
Seems like it defeats the whole purpose?
I called sound professionals up and their SP-Mini-90 is made of plastic with a glass end?
Not sure if he meant it was glass inside or if the connector was glass but the insides were plastic.
So it seems it would be glass>plastic>glass>unit


i have a couple of bettercables.com opitcals that i think are the best i've seen in a long time.  would you like to try one?

jonny, what ya got bud, i may def be interested :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline 1st set only

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2115
  • Gender: Male
  • you are what you is
    • Don Poulsen Illustration and Graphic Design
Re:robust optical toslink cables rec?
« Reply #39 on: November 17, 2004, 04:13:34 PM »

Dayton Digital Optical Cable 1.5' $6.90(and what I own now)


I've order from this company many times and have been very happy with everything.  Finding those "optional" requirements won't happen, but you can find the adapters for this (right angels, and miniplugs) on Parts Expresses site as well if your interested...

I have this cable and i think it is great what i love about it the most is that it is short. the adapters that parts express sells are great as well all metal and glass tips. it is also cheap which aint that bad

the show is over go home please.

Offline 1st set only

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2115
  • Gender: Male
  • you are what you is
    • Don Poulsen Illustration and Graphic Design
Re: robust optical toslink cables rec?
« Reply #40 on: November 17, 2004, 04:15:25 PM »
hey bri not to be a pain in the ass but shouldnt this be in the cables forum?  ;)
the show is over go home please.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: robust optical toslink cables rec?
« Reply #41 on: November 17, 2004, 04:17:59 PM »
thats just it, im trying to order a few rt angles from connectxpress and they have a minimum order of 15 dollars :P

and at parts express I cant find the rt angle adapters, and they have the phoenix gold cable i want

does anybody know if the phoenix cable is glass or fiber ??? i think its fiber, which is proly better for field use since no glass cracks in the filed, id keep the glass at home for the theatre personally

thanks guys, i seem to be slacking mentally today, any help is appreciated

so, is the PG fiber or glass? and does parts express have rt angle toslink>mini adapters?

ive looked for a few days w/ no luck of the rt angle adapetsr
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: robust optical toslink cables rec?
« Reply #42 on: November 17, 2004, 04:18:25 PM »
no, cause im asking tapers questions ;)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: robust optical toslink cables rec?
« Reply #43 on: November 17, 2004, 04:28:05 PM »
hey bri not to be a pain in the ass but shouldnt this be in the cables forum?  ;)

Heh...right you are!  Good eye, I often don't catch old threads bubbling back up to the top that should be moved to newer forums.  Moving...
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: robust optical toslink cables rec?
« Reply #44 on: November 17, 2004, 04:35:20 PM »
damnit, nazi ;D
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline John R

  • Trade Count: (2)
  • Needs to get out more...
  • Posts: 10100
  • Gender: Male
    • www.tapers.org
Re: robust optical toslink cables rec?
« Reply #45 on: November 17, 2004, 10:31:16 PM »
posted elsewhere somewhere here, but i'll give it a go again.  the toslink is the phoenix gold  DTX.910 with the ra's tony mentioned
« Last Edit: November 23, 2004, 09:48:59 AM by John R »
we all live downstream.

Offline 1st set only

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2115
  • Gender: Male
  • you are what you is
    • Don Poulsen Illustration and Graphic Design
Re: robust optical toslink cables rec?
« Reply #46 on: November 18, 2004, 11:11:54 AM »
posted elsewhere somewhere here, but i give it a go again.  the toslink is the phoenix gold  DTX.910 with the ra's tony mentioned

is that hosa device getting an aes in?
the show is over go home please.

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped  that are in circulation
Re: robust optical toslink cables rec?
« Reply #47 on: November 18, 2004, 11:25:28 AM »
that is the hosa odl 312, which is aes > optical. the odl 276 is coax > optical

 

RSS | Mobile
Page created in 0.23 seconds with 76 queries.
© 2002-2024 Taperssection.com
Powered by SMF