Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: 1st set only on August 22, 2003, 11:32:40 AM
-
So I got this phantom power thing and this is my proposed plan for the chain.
third mic> phantom power> XLR to 1/4> 1/4 to mini> Sound Pros pre> Ass end of UA-5 (RCA).
Im figuring that the sound pros will give me gain am I wrong?
now the other question I have is this how important is cable length? the path for the third mic might end up shorter than the other two
am I fucked? what do you all think?
-
now the other question I have is this how important is cable length? the path for the third mic might end up shorter than the other two
am I fucked? what do you all think?
well...if your cable is too short and can't get to the height you're running your other mics, yeah that seems like a problem...solution...longer cable! or did i misread that...
-
no im wondering if there will be a delay issue
-
So I got this phantom power thing and this is my proposed plan for the chain.
third mic> phantom power> XLR to 1/4> 1/4 to mini> Sound Pros pre> Ass end of UA-5 (RCA).
Im figuring that the sound pros will give me gain am I wrong?
now the other question I have is this how important is cable length? the path for the third mic might end up shorter than the other two
am I fucked? what do you all think?
I don't think you'll have a problem as long as your cable is long enough. But I think you'll need something between the SP pre and the UA5. Isn't the SP pre a mini plug?
-
i don't think there would be delay issues.... unless you were running a cable over a mile long... good luck..
-
damn they are a mile long I thought that might be a problem ;)
-
i thought that electricity travels at just less than the speed of light...