Topic: YAY (V3 content) :D

[zhianosatch]

The Mule @ The Pageant 10/21 will show them what it should sound like!
Hope to see ya down front.

no actives. have fun though.....you'll be blocking the whole time while i'm standing comfortabley in front of the board only mere feet behind you

no point for fob at the pageant IMO.

DON'T SPORT THE SHIRT IF YOU CAN'T HACK IT

 

[Brian]

The Mule @ The Pageant 10/21 will show them what it should sound like!
Hope to see ya down front.

no actives. have fun though.....you'll be blocking the whole time while i'm standing comfortabley in front of the board only mere feet behind you

no point for fob at the pageant IMO.

DON'T SPORT THE SHIRT IF YOU CAN'T HACK IT

 

you misread ....... it will sound better where i'm gonna set up

*served*

[caymanreview]

there is no reason to go FOB at the pageant... you would just have to see it to know

[fobstl]

sucks that we lost the American Theatre for that place...

Amen to that. I loved the vibe at The American Theater. Everyday I look at the venue from the SBC building a few blocks away...just waiting. patiently. The Pageant doesn't carry the same weight for me.

<grovel>I'm still looking for copies of any Black Crowes recordings from the American in STL; 07/30/92 & 07/31/92... Anyone ?</grovel>

Hey Boa,
Good to see you on the taper section - the STL factor is growing on this list.
Also good to see you last night at Crazy Bowls and Oberweis.

[Brian]

me likey my new V3

[Brian]

backatcha and yes i did a two night run this weekend for it's maiden voyage!  XY cards FOB( for Brother's Past in St. Louis and hypers DINa for Bockman's Euphio in Columbia, MO.  some overs here and there so, yeah, pushed it real good and hard.....tapes sound very nice

[Brian]

moke you make an excellent point!  there were several times when my m1 meters would show an over but the V3 did not.  and because each clip i had on the V3 were due to transients(loud bass or drums) you can't hear 99% them on the tapes

nice bit on the tas700 meters.....wonder what other recorders' meters are like.

[Gordon]

so this thread made me plug in the v3 I got on loan.  I have 6v ecocharges as well as 12v.  the v3 is labeled 6v on the back.  it will not power up using either battery.  don't know ANYTHING about the pins etc but the xlr connecter looks the same as the one for my p1.      

[F.O.Bean]

are they charged

if so, check the pins where you plug the v3 power cord in, they may be touching

[Gordon]

EDIT

I figured it out.   for some reason when I plug the  cabel into  the v3 and srew it in tight it won't do anything.  well I unscrewed it and wigled it around and saw lights    but it will only power on and stay on while holding the cabel in kind of crooked.  so I asume (hope) it's the cabel and not the connection on the v3.     

[Gordon]

thanks +t y'all.  I'll take a look at it.

[Gordon]

On your power cable, at the V3 end is a switchcraft connector. Look inside the end of that connector, and you will see that the little male pin is split. You will likely need to carefully pry the contact apart slightly to reestablish solid contact.

looked inside the end and don't really see a male pin.  kind of looks hollow.   

[F.O.Bean]

that does not sound good, there should be 2 pins that are about an 1/8" apart, if there arent 2 pins, then something is seriosuly wrong bro

[Gordon]

in the v3 or the cable?  he said in the cabel.  there are two pins in the v3 part.

[F.O.Bean]

in the v3 i was talking